Manual Boso Bosotherm basic (page 6 of 12) (English, German, French, Italian, Spanish)

704278

Zoom out

Zoom in

1/12

TURNING ON THE THERMOMETER

The device must be installed and put into operation

in accordance with the instructions in this manual.

To get help concerning usage or maintenance plea-

se contact your dealer or the manufacturer.

An unexpected operating condition or an incidence

which has worsened the health condition or could

have worsened the health condition should be

reported to the manufacturer immediately.

To turn on the thermometer, push the ON/OFF-button;

a short signalling tone [beep] indicates «thermome-

ter ON.» A so-called LCD-test automatically takes

place to check the display. Then a «L» and a flashing

«°C» appear on the upper right of the display, if the

ambient temperature is less than 32°C. Now the ther-

mometer is ready for use.

USING THE THERMOMETER

During a measurement, the temperature is displayed

continuously and the «°C» symbol flashes. If the sig-

nalling tone sounds (beep-beep-beep-beep 10 times)

and the «°C» no longer flashes the measurement is

completed (the measured increase in temperature is

now less than 0,1 °C in 15 seconds).

To extend the lifetime of the battery, turn off the ther-

mometer after usage by pressing the ON/OFF-button

briefly. Otherwise the thermometer will automatically

turn off after about 10 minutes.

MEMORY OF MEASURED VALUES

When turning the thermometer on, the temperature

of the last measurement will be displayed. After 3

seconds, this value will disappear and the thermome-

ter will switch to the normal measurement mode.

Then the stored value is erased.

CLEANING AND DISINFECTING

For cleaning of the instrument please use isopropyl

alcohol (70%). For disinfecting wipe the instrument

completely with Antifect Liquid (please obey 5 min.

work-in-time).

CHANGE OF BATTERY

As soon as the symbol " " appears on the display,

the battery is weary and a new battery has to be in-

serted. Open the cover of the battery compartment

and insert the new battery with "+"symbol facing

upwards.

TECHNICAL SPECIFICATIONS

Maximum thermometer

Measuring range: 32.0°C to 42.0°C

Temp.< 32.0°C:display «L» for low (too low)

Temp.> 42.0°C:display «H» for high (too high)

Accuracy: ± 0.1°C between 35,5°C and 42°C

Operating conditions: environmental temperature

5°C to 35°C, air pressure 700 – 1060 hPa, relative hu-

midity 40 to 88%

Liquid crystal display (LCD) with three digits. Smallest

unit of display: 0.1°C

Signalling tone sounds when thermometer is ready

for use and when measurement is completed.

Memory: automatic memory of the last measured va-

lue.

Storage conditions: environmental temperature

-25°C to +55°C, relative humidity 15% - 95%

Battery: 1,5 V, IEC-Type LR/SR 41

1,000 measurement cycles (depending on frequency

of use).

Norm: EN 12470-3, clinical thermometer

Protection against solid objects and water: IP 67 (in

accordance with IEC 60529)

Expected operational lifetime of the equipment: 10

years

WARRANTY

This unit is under warranty for 2 years from the date

of purchase.

Please submit the receipt, invoice or delivery note

when claiming for warranty.

For both, warranty and repair, please send the instru-

ment carefully packed and postage paid either to

your authorized dealer or directly to

BOSCH + SOHN GMBH U. CO. KG

Bahnhofstr. 64

72417 Jungingen – Germany

Warrantyandrepairworkmust be undertaken by trai-

ned and authorised personnel. Do not modify this

equipment without authorization of the manufacturer.

CARE FOR THE ENVIRONMENT

Used batteries and defective electronic devices do

not belong into the household waste.

They can be deposited at special centres. Please

contact your local authorities for information.

bosotherm_basic_1902sd.qxd:bosotherm_basic_608 12.02.2019 12:42 Uhr Seite 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boso Bosotherm basic in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boso Bosotherm basic Manual

Product: