561819
21
Zoom out
Zoom in
Previous page
1/27
Next page
19
Operating Your Wave
®
Radio
Setting the alarms
Note: There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2
(secondary). You can set the wakeup time for either alarm with the radio on or off. The indica-
tor for the selected alarm flashes when setting time or mode. The ALARM 2 indicator contin-
ues flashing for 10 seconds after setting ALARM 2.
Function Control panel Remote control
To select which alarm to setOn the control panel, press and hold Alarm
Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator flashes
for the alarm you are setting.
On the remote, press Time. Press Alarm to select ALARM 2 or to return
to ALARM. The indicator flashes for the alarm you are setting.
To set the alarm timeOn the control panel, hold down Alarm Set and
press Tuning up (") or down (#). The time display changes slowly at first,
then more quickly. Release Tuning to stop.
On the remote, press Time. Press Tuning up (") or down (#). The time dis-
play changes slowly at first, then more quickly. Release Tuning to stop. Press
Time to return to the current time display.
To set the alarm modeOn the control panel, after selecting the alarm,
release Alarm Set and press Alarm Mode to select one of the following alarm
modes (Press Alarm on the remote):
For tone only, press until you see the indicator.
For radio only, press until you see the indicator.
For tone and radio, press until you see both indicators .
When the alarm tone sounds, press Sleep/Snooze to turn the radio on. Press
Sleep/Snooze to pause the radio for 10 minutes.
To cancel the alarm mode – Follow the directions for setting the alarm
mode. Press Alarm Mode (control panel) or Alarm (remote) until the
display shows no alarm mode indicators.
To check the alarm settingOn the control panel, press and hold Alarm
Set to see the ALARM wakeup time and the preset station. While holding
Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the pre-
set station.
On the remote, press Time to see the ALARM wakeup time. Press Alarm
to see the ALARM 2 wakeup time. Press Time again to return the dis-
play to the current time. ALARM 2 flashes for 10 seconds.
To wake to a preselected radio stationOn the control panel, ONLY, select
ALARM or ALARM 2. Press and hold Alarm Set, and then press one of the six
station Presets buttons (you can change between AM and FM if needed). To
clear the preset, press and hold Alarm Set and press the button for that pre-
set again.
Use the control panel to
select this feature.
Alarm Mode
Alarm
Set
Clock
Set
Volume
Presets
123
456
Tuning
Sleep/Snooze
AUX AM/FM
On/Off
Wave Radio
Time
Alarm
Sleep
Tuning
Station
Volume
Mute
AUX
AM
FM
On
Off
Wave Radio
1
23
4
5
6
Presets
Alarm
Set
Alarm Mode
Time
Tuning
Alarm
Set
Time
Alarm
Tuning
Alarm Mode
Sleep/Snooze
Sleep
Alarm Mode
Alarm
Set
Alarm Mode
Time
123
456
Presets
Alarm
Set
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Wave at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Wave in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info