535663
32
Zoom out
Zoom in
Previous page
1/38
Next page
32 - English
Problem What to do
The system is not responding
to initial operation of the click
pad remote control
• Make sure the control console is turned on. Refer to the control console system status light states on page 11.
• Press any remote control key and watch the control console system status light on the control console. It should blink
with each press. If not, see “Care and Maintenance” on page 36.
• Make sure the remote control batteries are installed correctly or replace them if they need replacement. (see page
37).
• Reset the system. See “Resetting the system” on page 33.
The Bose remote control
does not control a device
I connected to the control
console
• Try setting up the device again. Press the Setup button on the control console. Select the device options and follow
the on screen instructions to set up the device again.
• Your system may need a software update. See page 33.
• Install the IR emitter. “Installing the IR emitter” on page 30.
System doesn’t do anything • Make sure the monitor and the power supply are fully plugged into a live AC (mains) outlet.
• Select a connected device from the SOURCE menu (refer to “Selecting a source” on page 12).
• Pair the remote control. See “Pairing the remote control with the console” on page 33.
• Reset the system. See “Resetting the system” on page 33.
No sound • Increase the volume.
• Check the input connections on the control console. Make sure you have selected the right source.
• Make sure the source you have selected is turned on.
• If using a coaxial or optical audio connection, make sure you have not made both types of connections to the same
input on the control console.
• Make sure the monitor cable is firmly plugged into the A/V OUT to Monitor connector on the control console and the
other end is firmly seated into the connector on the monitor. Refer to the setup guide for details.
• Reset the system. See “Resetting the system” on page 33.
Intermittent audio dropouts
heard on a coaxial digital
audio input
• Use the composite video cable included with your system for this coaxial digital audio connection. Refer to “Source
setup” on page 28.
The quality of the video image
is not what I prefer
• Use the OPTIONS menu to make adjustments. Refer to “Restore original settings” on page 26.
I hear a loud hum or buzz
coming from certain sources
• Try connecting the system to a different AC (mains) outlet.
• Contact Bose
®
Customer Service to determine if and how other electrical devices in the room may be creating
unwanted signals, and to obtain possible remedies.
Note: When listening to audio sources like an iPod, the system automatically enters screen saver mode in order to prevent the risk of
screen burn-in. Press any button on the click pad remote control to restore the picture.
Troubleshooting
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose VideoWave III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose VideoWave III in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose VideoWave III

Bose VideoWave III User Manual - German - 38 pages

Bose VideoWave III Installation Guide - Dutch - 20 pages

Bose VideoWave III User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info