571317

Bose T1 ToneMatch audio engine Manual

42
Zoom out
Zoom in
Previous page
1/72
Next page
OPERATING INSTRUCTIONS
26
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
Adding reverb
The Reverb function applies a user-adjustable amount of reverb to the selected chan-
nel. To select the type of reverb, see “Selecting a type of reverb” on page 27.
Note: To bypass the Reverb effects, press the Mix button. Press it again to activate.
1. Rotate the Mix button to adjust the desired mix of dry signal to wet signal
(reverb-processed).
2. Rotate the Bright button to equalize the high frequencies of reverb applied to the
selected channel.
Routing input signals to the Aux output
The Aux function allows you to route signals from one of three tap points to the Aux
output for various signal processing, recording, and sound reinforcement applications.
The signal level is adjustable for each of the three available tap points:
Note: To mute the Aux output, press the Level button. Press it again to unmute.
1. Rotate the Level button to adjust the signal level of the selected channel.
2. Rotate the Tap button to scroll through the tap menu and highlight the desired
tap point.
Dry: After Preamp..........The completely dry (no processing) signal is routed directly from the preamp stage.
Pre: With EQ & FX.........The signal is routed from the preamp stage with applied processing.
Post: After Fader...........The signal is routed after the Channel volume control with applied processing.
3. Press the Select button to select the tap point, or press the Cancel button to exit with no change. The name
of the currently selected tap point appears in bold type.
CH 1 Reverb
Mix Bright
50% 50%
CH 1 Aux Output
Level Tap
50% Dry
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose T1 ToneMatch audio engine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose T1 ToneMatch audio engine in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose T1 ToneMatch audio engine

Bose T1 ToneMatch audio engine User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info