571132
18
Zoom out
Zoom in
Previous page
1/32
Next page
18
Mounting the Bracket
Direct mount with on-wall wiring
1. Remove bracket door(s).
2. Center wires over strain relief clamp
hole and insert strain
relief clamp:
Make sure the wires are seated
in the strain relief clamp
wire channels.
Make sure the wires are protected by
their outer jacket at
the point where the strain relief clamp is applied.
3. Tighten strain relief clamp.
4. Attach bracket to wall:
Use M4 or #8 screws with appropriate anchors.
At least two (2) screws must be used to hold the wall mount
bracket to
the support structure (stud).
Do not overtighten screws. If using a power drill, set to a low
to
rque setting.
Direkte montering med ledninger
væggen
1. Fjern beslagets låg.
2. Centrer ledninger over spændingsklemmens hul, og isæt
spændi
ngsklemmen:
Kontrolller, at ledningerne sidder fast i spændingsklemmens
ledn
ingskanaler.
Kontroller, at ledningerne er beskyttet med deres ydre stik til
det
punkt, hvor spændingsklemmen anvendes.
3. Stram spændingsklemmen.
4. Sæt beslag i væg:
Brug M4 eller nr. 8-skruer med egnede ankre.
Mindst to (2) skruer skal bruges
til at holde på vægmonteringens
beslag til den understøttende struktur (stolpe).
Stram ikke skruerne for hårdt. Ved brug af en elektrisk
bor
emaskine skal den indstilles til en lav momentindstilling.
Direkte Montage mit Überputz-
Verkabelung
1. Entfernen Sie die Abdeckung(en) der Halterung.
2. Führen Sie die Leitungen über die Öffnung für den Zug-Schutz
un
d setzen Sie den Zug-Schutz ein.
Achten Sie darauf, dass sich die Leitungen in den Führungen
des Zug-Schu
tzes befinden.
Achten Sie darauf, dass die Leiterdrähte an
der Kontaktstelle mit
dem Zug-Schutz durch die äußere Umhüllung geschützt sind.
3. Ziehen Sie den Zug-Schutz fest.
4. Bringen Sie die Halterung an der Wand an:
Verwenden Sie M4- oder #8-Schrauben
mit passenden Dübeln.
Befestigen Sie die Wandmontagehalterung mit mindestens
zwei
(2) Schrauben an der Stützstruktur.
Ziehen Sie die Schrauben nicht zu fest an. Wenn Sie einen
Akk
uschrauber verwenden, stellen Sie eine niedrige
Geschwindigkeit ein.
Montaje directo con cableado sobre
la pared
1. Retire el acceso o accesos al soporte.
2. Centre los cables a través del agujero de la pinza de anclaje e
inserte la pinza
de anclaje:
Compruebe que los cables se encuentran asentados en los
canales
de los cables de la pinza de anclaje.
Asegúrese de que los cables están protegidos por su
r
ecubrimiento exterior en el punto donde se aplica la pinza
de anclaje.
3. Apriete la pinza de anclaje.
4. Fije el soporte a la pared:
Utilice tornillos M4 o #8 con los tacos adecuados.
Deberá utilizar un mínimo de dos (2
) tornillos para sujetar el
soporte de montaje en pared a la estructura de soporte (perfil).
No ajuste los tornillos en exceso.
Si utiliza un destornillador
eléctrico, ajústelo a un par de apriete bajo.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Freespace DS 100se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Freespace DS 100se in the language / languages: Dutch as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Freespace DS 100se

Bose Freespace DS 100se Specifications - English - 8 pages

Bose Freespace DS 100se Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info