571132
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
Transformer tap setting
1. Position loudspeaker vertically with endcap closest to logo
facing up.
2. Pull forward on endcap to remove.
3. Set tap by turning the thumbwheel.
* Factory default ** NC: No Connection (do not use)
4. Press endcap into place — you should hear it click.
Note: If needed, you can remove the endcap and adjust the tap settings
after the loudspeaker is mounted.
Indstilling af transformerudtag
1. Placer højttaler lodret med endebolten tættest på logo,
der vender opad.
2. Træk fremad for at fjerne endebolten.
3. Indstil tap ved at dreje på tommelhjul.
* Fabriksstandard ** NC: Ingen forbindelse (undgå brug)
4. Tryk endebolten på plads - du skal høre et klik.
Bemærk: Hvis det er nødvendigt, kan du fjerne endebolten og justere
tappens indstillinger, når højttaleren er monteret.
Einstellung für Transformatorabgriff
1. Positionieren Sie die Lautsprecher vertikal, wobei die Blende,
die dem Logo am nächsten ist, nach oben weist.
2. Ziehen Sie die Blende nach
vorn, um sie zu entfernen.
3. Stellen Sie den Abgriff durch Dr
ehen der Einstellscheibe ein.
* Werkseitiger Standard ** NC: Keine Verbindung (nicht verwenden)
4. Drücken Sie die Blende wieder fest,
bis sie einrastet.
Hinweis: Bei Bedarf können Sie die Blende entfernen und den Abgriff
nach der Montage des Lautsprechers ändern.
Ajuste de las derivaciones
del transformador
1. Coloque el altavoz en vertical con el casquillo terminal más
cercano al logotipo mirando hacia arriba.
2. Tire del casquillo terminal hacia delante
para retirarlo.
3. Configure el terminal girando la ruedecilla.
* Ajuste de fábrica ** NC: Sin conexión (no utilizar)
4. Presione el casquillo terminal has
ta que se ajuste en su sitio.
Deberá oírse un clic.
Nota: Si es necesario, puede retirar el casquillo terminal y ajustar la
configuración las derivaciones después de montar el altavoz.
70V
NC**
12.5W* 25W 50W 100W
8Ω
25W* 50W 100W NC**
100V
70V
NC**
12.5W* 25W 50W 100W
8Ω
25W* 50W 100W NC**
100V
70V
NC**
12.5W* 25W 50W 100W
8Ω
25W* 50W 100W NC**
100V
70V
NC**
12.5W* 25W 50W 100W
8Ω
25W* 50W 100W NC**
100V
Removing End Cap and Accessing Tap Settings
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Freespace DS 100se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Freespace DS 100se in the language / languages: Dutch as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Freespace DS 100se

Bose Freespace DS 100se Specifications - English - 8 pages

Bose Freespace DS 100se Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info