497406
55
Zoom out
Zoom in
Previous page
1/70
Next page
52 of 66
8.0 FreeSpace
®
4400 System Troubleshooting
8.1 Introduction
This section provides troubleshooting guidelines to use for solv-
ing any problems you may encounter while installing and servic-
ing FreeSpace 4400 systems.
8.2 FreeSpace 4400 hardware
indicators
8.2.1 Normal operation
These are the indications of normal operation.
8.2.2 System fault
A red SYSTEM STATUS LED indicates that the FreeSpace 4400
received an error from one of its many internal components. A red
SYSTEM STATUS LED after AC power is switched on may be
caused by:
A Power-On Self-Test failure
A DSP error
The DSP is offline
To determine the severity of the error, cycle the FreeSpace 4400
system power off and back on again. If the SYSTEM STATUS
indicator is now off, the FreeSpace 4400 system has logged an
error, but is still operational.
When you check the error log using the FreeSpace
®
4400
Installer™ software you can identify the cause of the error, and
determine an appropriate solution.
OUTPUTS
1234
SYSTEM
STATUS
1234
INPUTS
DIRECT
INPUT
STANDBY
STANDBY
Unlit
SYSTEM STATUS
Green
AMP OUTPUTS
Unlit or Green
AUDIO SOURCES
Unlit, Amber, or Green
DIRECT INPUT
Unlit
System logged an error – Check
the FreeSpace 4400 Installer
software Error Log.
OUTPUTS
1234
SYSTEM
STATUS
1234
INPUTS
DIRECT
INPUT
STANDBY
SYSTEM STATUS
Indicator is red
Have you cycled
the FreeSpace 4400 in
and out of
STANDBY?
Switch the FreeSpace 4400 system
to STANDBY and then back to ac-
tive again. If the SYSTEM STATUS
is green, the system may have
logged an error. Check the
FreeSpace 4400 Installer™ soft-
ware Error Log.
No
Yes
1. Switch the FreeSpace 4400 sys-
tem to STANDBY.
2. Set the POWER switch to OFF.
3. Wait for STANDBY indicator to
turn off.
4. Set the POWER switch to ON.
5. Press the STANDBY switch.
1. Switch the FreeSpace 4400 sys-
tem to STANDBY.
2. Set the POWER switch to OFF.
3. Disconnect all input/output sig-
nal cables.
4. Set the POWER switch to ON.
5. Press the STANDBY switch.
6. Reconnect one cable at a time
and check the Error Log.
Have you
cycled the FreeSpace
4400 power
on and off?
Have you
disconnected all
input/output
cables?
Yes
No
No
Yes
Contact your local
Bose representative or
visit pro.Bose.com
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose FreeSpace 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose FreeSpace 4400 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info