497406
37
Zoom out
Zoom in
Previous page
1/70
Next page
34 of 66
6.0 FreeSpace
®
4400 System Setup
6.1 Introduction
This section provides instructions on setting up an installed
FreeSpace 4400 system. To set up a FreeSpace 4400 system you
need a PC running the FreeSpace
®
4400 Installer™ software.
6.2 Connecting your PC to a
FreeSpace 4400 system
Before you can set up the FreeSpace 4400 system, your PC must
first be physically connected to the FreeSpace 4400 system with
a serial cable and then that connection must be activated using
the FreeSpace 4400 Installer™ software.
1. Connect the RS-232 serial port of your PC to the RS-232
serial port on the rear panel of the FreeSpace 4400 system
using a straight serial data cable.
Programmer’s Note: If your computer does not have
an RS-232 port you will need to use an RS-232 to USB
adapter.
2. Set the FreeSpace 4400 rear panel POWER switch to ON.
When the FreeSpace 4400 system is powered up and ready,
the SYSTEM STATUS indicator is dark (unlit) and the
STANDBY indicator is amber.
3. Press the STANDBY push button to switch the FreeSpace
4400 system to the operating mode. The STANDBY indicator
will turn off and the SYSTEM STATUS indicator will be green.
(If a system fault condition exists, the indicator will be red.)
Programmer’s Note: If the FreeSpace 4400 system
experiences a brownout or power loss, the FreeSpace
4400 system will return to power in the STANDBY
mode. To return to operation, press the STANDBY but-
ton, or press any key on any user Interface.
4. Launch the FreeSpace 4400 Installer™ software. See
Launch the FreeSpace 4400 Installer™ software.” on
page 25 for the software launching sequence.
RS232
Laptop PC
RS-232 straight
serial data cable
(not provided)
4400 system
POWER switch
STANDBY indicator
Amber = Standby
Unlit = Active
STANDBY
push button
SYSTEM STATUS indicator
Green = Operating
Red = Fault
Front
Rear
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose FreeSpace 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose FreeSpace 4400 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info