497406
34
Zoom out
Zoom in
Previous page
1/70
Next page
31 of 66
5.0 Using FreeSpace
®
4400 Installer™ Software
5.5.1 Setting the clock
The date and time of the hardware clock is initially set in Eastern
Standard Time. After your PC is connected to the hardware,
check the clock and set it as necessary for the time zone and
region of your installation.
To adjust the clock settings manually, click the Set Clock button
in the clock panel. The Clock Settings window opens, allowing
you to make adjustments to the date and time. Click Apply or OK
to set the clock in the hardware, or click Cancel to close the win
-
dow and leave the clock settings unchanged.
5.5.2 Adding events
When you click the On/Off, Volume, Source, or Auto Volume
event button, an event of that type is added to the event list. At
this point you can change the event settings. When the event list
exceeds the length of the pane, the software will add a scroll bar
on the right side.
A maximum of 64 events may be added to a system. This means
that the total number of events from all event lists must not
exceed 64. An On-Off event consumes two events, while source
change, volume change, and Auto Volume events consume one
apiece. A counter is provided in the Schedule mode window to
keep track of the number of remaining events.
Zone events programmed to occur at the same time as a “Sys-
tem ON” event will not occur. To ensure that zone events will hap-
pen, they must be programmed to occur 15 minutes after the
“System ON” event. For example, if a “System ON” event is pro
-
grammed to occur at 8:00 AM, the first zone event should be pro-
grammed to occur at 8:15 AM.
Installer’s Note: Flashing the FreeSpace 4400 Installer soft-
ware configuration file to the FreeSpace 4400 system sets the
default state of the system when it is turned on. Whenever
possible the default state of the system should be set to meet
the requirements most likely to occur after a scheduled “Sys-
tem ON” event.
Adds a system Auto On/Off event
This event applies only to the whole system. You can select indi-
vidual on or off times for the day(s) you choose. Or, you can
select on and off times in a single statement.
Programmer’s Note: One Auto On/Off event specifies
both anOn time and anOff time and is counted as two
events.
Adds a zone Mute event
This event allows you to mute/unmute the zone output at a
specified time on selected days of the week.
Adds a zone Volume Change event
This event allows you to change the volume level at a specified
time on selected days of the week.
Programmers Note: The maximum/minimum volume
stops cannot be adjusted in this pane. To adjust these limit
stops, select the Output Gain function in the Set Up Hard-
ware mode.
Remaining events
counter
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose FreeSpace 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose FreeSpace 4400 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info