497406
29
Zoom out
Zoom in
Previous page
1/70
Next page
26 of 66
5.0 Using FreeSpace
®
4400 Installer™ Software
5.2.1 No hardware detected
If after launching the FreeSpace 4400 Installer™ software a hard-
ware device is not found, the status window reports a failure to
detect connected hardware:
In this case, clicking the Close button results in a blank hardware
setup window.
Programmer’s Note: If you are not connected to the
FreeSpace 4400 system, you can see an example of the
FreeSpace 4400 front panel by opening the sample
design file provided on the FreeSpace 4400 Installer CD.
See “Sample design files” on page 26.
Programmer’s Note: To configure a FreeSpace 4400
system, the FreeSpace 4400 system must be powered
up. DO NOT switch the FreeSpace 4400 system to
STANDBY mode while the FreeSpace 4400 Installer
software is running.
Programmer’s Note: The FreeSpace 4400 Installer
software does not notify you if there is a loss of communi-
cation between the FreeSpace 4400 system and your
PC.
5.2.2 Incompatible microcontroller code
If the FreeSpace
®
4400 Installer™ software finds that your system
is running an older version of firmware (microcontroller code), the
following window appears, giving you the opportunity to upgrade
the code.
Click Upgrade to upload the latest version of microcontroller
code to the device. When the "Upload Complete" window
appears, click Close. Then, finish the installation and configure
your hardware device.
Programmers Note: Upgrading new software does
not change any of your current configuration settings.
When the upgrade is finished, your current configuration
will be restored.
Click Cancel to exit the software and leave the device
untouched.
Programmers Note: The FreeSpace 4400 Business
Music System is only compatible with the FreeSpace 4400
Installer software. The FreeSpace 4400 system is incom-
patible with the FreeSpace E4 system's FreeSpace Installer
software. Additionally, the FreeSpace E4 system is incom-
patible with the FreeSpace 4400 Installer software.
5.2.3 Sample design files
Two sample design files are included with your FreeSpace
®
4400
Installer™ software:
sample70V.fsi – for 70V FreeSpace 4400 systems
sample100V.fsi – for 100V FreeSpace 4400 systems
They can be used to display a FreeSpace 4400 front panel when
your PC is not connected to a system hardware device.
To open the sample design file:
1. Click the Open file tool in the FreeSpace 4400 Installer
software window.
2. Select the name of the sample design file in your
FreeSpace 4400 Installer software directory:
C:\Program Files\FreeSpace 4400 Installer 1.0.0.
3. Click the Open button in the dialog box.
4. Click on the “Bose FreeSpace 4400” system name in the
System Overview pane. The FreeSpace 4400 front panel will
appear in the application window.
Programmers Note: If you are not connected to the
FreeSpace 4400 system when you open a design file, all
controls within the software are grayed out and not
accessible.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose FreeSpace 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose FreeSpace 4400 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info