704839

Bose F1 Subwoofer Manual

18
Zoom out
Zoom in
Previous page
1/164
Next page
18 - English
Care and Maintenance
Caring for Your Product
Cleaning
• Clean the product enclosures using only a soft, dry cloth.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
• Do not use any sprays near the product or allow liquids to spill into any openings.
• If necessary, you may carefully vacuum the grille of the loudspeaker array.
Getting Service
For additional help in solving problems, contact the Bose Professional Sound Division at (877) 335-2673 or visit our
support area online at www.Bose.com/livesound.
Troubleshooting
If you experience problems while using this product, try the following solutions. The recommended troubleshooting
tools include a spare AC power cord and extra XLR and 1/4” phone plug cables.
Problem What to do
Loudspeaker is plugged in,
power switch is on, but power
LED is off.
• Make sure the power cord is fully engaged into both the F1 Model 812 Loudspeaker and the AC
outlet.
• Make sure you have power at the AC outlet. Try operating a lamp or other equipment from the
same AC outlet.
• Try a different power cord.
Power LED is on (green),but
no sound.
• Make sure the VOLUME control is turned up.
• Make sure volume control is turned up on your instrument.
• Make sure your instrument or audio source is plugged into the appropriate input connector.
• If the F1 Model 812 Loudspeaker is receiving input from the F1 Subwoofer, make sure the
subwoofer is turned on.
Instrument or audio source
sounds distorted.
• Lower the volume of the connected audio source.
• If you are connected to an external mixing console, make sure input gain to the mixing console
input channel is not clipping.
• Reduce the output of the mixing console.
Microphone is encountering
feedback.
• Reduce the input gain on the mixing console.
• Try positioning the microphone so it nearly touches your lips.
• Try a different microphone.
• Use the tone controls on the mixing console to reduce the offending frequencies.
• Increase the distance from the loudspeaker to the microphone.
• If using a vocal effects processor, make sure it is not contributing to the feedback.
Poor Bass Response • If using the F1 Model 812 Loudspeaker without the F1 Subwoofer, make sure the EQ switch is
set to FULL RANGE.
• If using the F1 Model 812 Loudspeaker with the F1 Subwoofer, check to see if the POLARITY
switch is in NORMAL mode. If there is a fair amount distance between the F1 Subwoofer and
the F1 Model 812 Loudspeaker, setting the POLARITY switch to REV may improve bass.
• If using two F1 Subwoofers, make sure that the POLARITY switch is in the same position on
each subwoofer.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose F1 Subwoofer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose F1 Subwoofer in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 21,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info