571290
31
Zoom out
Zoom in
Previous page
1/146
Next page
The appliance 750GH is fitted with vermiculite
inner plates.
The appliance 750GH is fitted with a removable de-
ashing hatch.
The appliance 750GM is fitted with cast-iron inner
plates.
The appliance 750GM is fitted with a grate through
which the ash falls.
Additional feature of the 750GM
The appliance is suitable for the burning of wood,
brown coal briquettes and anthracite coal.
Installation
Preparation
Please check the appliance for damage caused
during transport or any other damage or defects
immediately after delivery. The appliance is
attached to the pallet with screws at the bottom.
If you detect damage caused during transport
or any other damage or defects, do not use the
appliance and notify the supplier.
Remove the removable parts (fire-resistant inner
plates, ash pan, side wall heat shield) from the
appliance before you start installing the appliance.
By removing removable parts, it is easier to
move the appliance and to avoid damage.
Note the location of those removable parts, so
that you have no difficulties in installing the
parts in the right place later on.
1. Open the door.
2. Remove the fire-resistant inner plates.
Cast iron inner plates protect the combustion
chamber and dissipate heat to the
environment.
Fitting the handle
The appliance is supplied with a loose handle, the so-
called "cold hand".
Fit the wooden handle to the adaptor using screw
M8x50 provided; see following figure.
09-20015.088
Preparing the connection to
chimney
When connecting the appliance to the chimney you
have the choice of connecting via either the upper side
or the rear; see following figure.
Plug the outlet that you don't want to use with the
corresponding cover that was supplied.
Install the corresponding connection collar that
was supplied on the outlet that you want to use.
Sealant and materials supplied.
When connecting to the upper side an opening has
to be made in the heat shield. At the spot when the
Subject to change because of technicalimprovements
7
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose B2 basmodule at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose B2 basmodule in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose B2 basmodule

Bose B2 basmodule User Manual - German - 6 pages

Bose B2 basmodule User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info