818577
31
Zoom out
Zoom in
Previous page
1/36
Next page
31
TROUBLESHOOTING
Stereo missing or communi-
cations in one ear only
If your aircraft has a mono audio system, verify that the stereo/
mono configuration switch is set to mono. See “Changing the
optional operation switches” on page 13. If the switch is set to
stereo, and the headset is plugged into a mono audio system,
you will hear only through the left earcup.
Squealing, whistling, or
chirping sound when the
system is turned on
Check to see if the protective inner screen is damaged.
Low rumbling sound with
headset turned on in a quiet
environment
Adjust the earcup fit to create a better seal on your head. The
headset’s low-force design makes it sensitive to items that
interfere with the seal around your ear. Make sure that your
ears are completely inside the ear cushions, and that a hat or
eyeglasses with thick temples do not interfere with the seal.
Check ports at the outside surface of each earcup to ensure
they are not blocked. If dust or dirt is present, carefully remove
the debris using tweezers. Do not blow out or vacuum debris.
Inspect the seal between the ear cushion skirt and the earcup.
The skirt should enclose the earcup evenly, without gaps.
Replace any cushions that have surface tears, torn stitching
joints, large wrinkles, or have become dried and stiff.
Crackling sound audible with
headset turned on in a loud
environment, or ANR is inter-
mittent
Adjust the earcup fit to eliminate the crackling sound. Refer to
“Wearing it properly” on page 19.
If your headset is battery powered, check to see if the battery is
low (indicated by fast blinking red LED).
If your headset is aircraft powered, make sure that the voltage
powering the headset is greater than 10 VDC.
Inspect the seal between the ear cushion skirt and the earcup.
The skirt should fit into the slot on the earcup with no gaps.
Replace any cushions that have surface tears, torn stitching
joints, large wrinkles, or have become dried and stiff.
No active noise reduction
and no communication
Check boom microphone cable connection on the bottom of
the earcup.
CAUTION: Do not attempt to disassemble or service the inside of the earcups or other parts of the head-
set. Only the boom microphone cable, connector access cover, batteries, battery cover, windscreen, head-
band cushion, and ear cushions are replaceable by the user. For instructions on how to care for the headset
and how to replace the ear cushions, refer to “Headset Care and Maintenance” on page 25.
00_AM270261-01_HeadsetXII.book Page 31 Tuesday, August 11, 2009 2:27 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Aviation Headset X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Aviation Headset X in the language / languages: English as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Aviation Headset X

Bose Aviation Headset X User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info