571123
10
Zoom out
Zoom in
Previous page
1/18
Next page
10
Setting Up
Connecting the Acoustimass
®
module to the receiver
The 20-foot (6.1 m) system input cable connects the module to your surround receiver (see
Figure 6). The system input cable has a multi-pin connector on one end and several wire pairs
on the other. The wire pairs of the cable may be separated or unzipped as much as needed
to comfortably reach the surround receiver connections. Each wire pair is marked on the
cable jacket with
RIGHT
,
LEFT
,
CENTER
,
RIGHT SURROUND
or
LEFT SURROUND
to indi-
cate where each wire connects to the receiver.
CAUTION: Before making any connections turn off your receiver and unplug it from the AC
(mains) outlet. Not doing so may result in damage to your system.
CAUTION: Do not connect the powered Acoustimass module directly to your TV unless the
TV provides surround decoding circuitry and amplified outputs for all channels.
1. Insert the multi-pin connector on the system input cable into the input jack on the Acous-
timass module. Tighten the two thumbscrews to assure a secure connection.
2. Connect each wire pair on the other end of the system input cable to your surround
receiver. Carefully match the polarity of the connections (+ to + and to ).
Attach each marked wire (+) to the appropriate + terminal.
Attach each plain wire () to the appropriate terminal.
Note: The RCA plug of the system input cable comes with a cover installed. Remove this
cover for connection to the LFE/SUBWOOFER OUT jack. If your receiver has no LFE/SUB-
WOOFER OUT jack, leave the plug cover in place.
3. If applicable, connect the RCA plug on the system input cable to the LFE/SUBWOOFER
OUT jack on your surround receiver.
CAUTION: Do not allow exposed wires to brush against each other; this could damage your
receiver.
264887_00 _V.pdf • August 13, 2002
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Acoustimass 10 Series III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Acoustimass 10 Series III in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Acoustimass 10 Series III

Bose Acoustimass 10 Series III User Manual - German - 18 pages

Bose Acoustimass 10 Series III User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info