489498
14
Zoom out
Zoom in
Previous page
1/44
Next page
10
Tab 3, 11
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
EnglishTab2 , 1 0
PREPARING THE HEADSET FOR USE
3. To change a switch position, use a pen or a small, flat-tipped screwdriver to
gently move the switch.
The following table shows possible positions, default setting, and purpose for
each switch.
Auto Off functionality
The Auto off feature detects when the headset is not in use and shuts it off after
several minutes to preserve battery power. The exact time it takes to shut off
varies and can range between 3 to 9 minutes after you stop using the headset.
When the headset is running on battery power only and is not plugged in to an
intercom, it will shut off even when there is an auxiliary input present.
If you are on a phone call and unplugged from an intercom, the headset will
allow you to complete your call, then it will turn off approximately three seconds
after the call is terminated.
Note: To use the headset when unplugged from the intercom to listen to auxiliary
input audio or as a Bluetooth
®
wireless technology enabled headset to make or receive
calls, we recommend you disable the Auto Off feature for uninterrupted functionality.
Inserting and replacing the batteries
CAUTION: If the batteries do not fit correctly, do not force them in. Forcing an
improper connection will cause permanent damage to the control module.
To insert or replace the batteries
1. Turn off headset power.
2. Press down firmly on the battery compartment cover and slide the cover to
release. The battery door is tethered. Do not detach the door from the
control module.
3. Insert the two supplied alkaline AA batteries into the control module,
observing proper polarity.
4. Replace the battery compartment cover.
Note: Rechargeable batteries will alter the accuracy of the battery power indicator.
Switch Options Purpose
1. Auto off
function
ON, OFF
Default: ON
Set at the factory to enable the Auto Off function. The
headset will turn off after 3 to 9 minutes of inactivity.
To disable Auto Off, set the switch to OFF. With the
switch in OFF position, the Acoustic Noise
Cancelling
®
system will not turn off until you press
and hold the power button for at least one second.
2. Mono/Stereo
selection
Mono, Stereo
Default: MONO
Set at the factory for mono audio systems (to
provide audio in both ears). Set it to stereo (ST) if
your aircraft has a stereo intercom.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose A20 AVIATION HEADSET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose A20 AVIATION HEADSET in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose A20 AVIATION HEADSET

Bose A20 AVIATION HEADSET User Manual - English, German, French, Portuguese, Spanish - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info