418941

Bose 191 Manual

5
Zoom out
Zoom in
Previous page
1/34
Next page
5
English
Preparation
Unpacking
Carefully unpack the speakers. Save all packing materials, which provide the safest means to
transport your speakers as needed. If any part of the speaker pair appears damaged, do not
use the pair. Notify Bose or your authorized Bose
®
dealer immediately. For Bose contact infor-
mation, refer to the address list included in the carton.
Check to be sure the carton includes all the parts shown in Figure 2.
Note:
Now is a good time to find the serial numbers on the back of each speaker. Copy those
numbers onto your warranty card and in the “For your records” space on page 3.
Figure 2
Contents of the carton:
• 2 Speakers, rectangular
frames attached
• 2 Rectangular speaker
grilles
• 1 Rectangular paint shield
• 1 Rectangular template
• 2 Round speaker frames
• 2 Round speaker grilles
• 1 Round paint shield
• 1 Round template
Other equipment you’ll need
Hardware for securing the speaker to a wall or ceiling comes attached to the speaker. But you
will need a variety of other equipment, including tools, to prepare the surface for installing the
speakers (Figure 3).
Figure 3
Items required to install the
speakers as instructed
5
1
/
2
" (14 cm
)
8
1
/
1
6
" (20.5 cm
)
14
1
/
2
" (36.9 cm
)
TA
PE
HERE
TA
PE
HER
E
TAPE
HER
E
WHITE CUT OUT AREA
W
H
IT
E
C
U
T
O
U
T
A
R
EA
Pilot Hole
W
A
R
NING
: Make sure the spot chosen is safe for cutting. Do not cut through
surfaces that have hazards, such as electrical wiring, conduits or plumbing,
concealed behind them. If you are not sure, consult a professional installer
before you proceed.
DO NOT
CUT AROUND
GRAY AREA
English & Translations
W
A
R
N
I
N
G
:
Make sure the spot chosen is safe for cutting. Do not cut through surfaces that have hazards, such as electrical
wiring, conduits or plumbing, concealed behind them. If you are not sure, consult a professional installer before you proceed.
W
A
R
N
I
N
G
:
Make sure the spot chosen is safe for
drilling. Do not cut through surfaces that have hazards
concealed behind them, such as electrical wiring,
conduits or plumbing. If you are not sure, consult a
professional installer before you proceed.
W
A
R
N
I
N
G
:
Make sure the spot chosen is safe for
drilling. Do not cut through surfaces that have hazards
concealed behind them, such as electrical wiring,
conduits or plumbing. If you are not sure, consult a
professional installer before you proceed.
W
A
R
N
I
N
G
:
Make sure the
spot chosen is safe for
drilling. Do not cut through
surfaces that have hazards
concealed behind them,
such as electrical wiring,
conduits or plumbing. If you
are not sure, consult a
professional installer before
you proceed.
W
A
R
N
I
N
G
:
Make
sure the spot chosen
is safe for drilling. Do
not cut through
surfaces that have
hazards concealed
behind them, such
as electrical wiring,
conduits or
plumbing. If you are
not sure, consult a
professional installer
before you proceed.
W
A
R
N
I
N
G
:
Make sure the spot chosen is safe
for drilling. Do not cut through surfaces that have
hazards concealed behind them, such as
electrical wiring, conduits or plumbing. If you
are not sure, consult a professional installer
before you proceed.
W
A
R
N
I
N
G
:
Make sure the spot
chosen is safe for drilling. Do not cut
through surfaces that have hazards
concealed behind them, such as
electrical wiring, conduits or plumbing.
If you are not sure, consult a
professional installer before you
proceed.
9" (22.9 cm
)
TAP
E
H
ER
E
T
r
a
n
s
l
a
t
i
o
n
s
b
e
l
o
w
TAP
E
H
ER
E
TA
PE
H
ERE
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
T
A
P
E
H
E
R
E
WHITE CUT OUT AREA
WHITE CUT OUT AREA
P
ilot H
ole
W
A
R
N
I
N
G
:
Make sure the spot chosen is safe for cutting.
Do not cut through surfaces that have hazards, such as
electrical wiring, conduits or plumbing, concealed behind
them. If you are not sure, consult a professional installer
before you proceed.
DO NOT
CUT AROUND
GRAY AREA
W
A
R
N
IN
G
: Make sure the spot chosen is safe for cutting. Do not cut through surfaces that have hazards, such as electrical
wiring, conduits or plumbing, concealed behind them. If you are not sure, consult a professional installer before you proceed.
W
A
R
N
IN
G
:
Make sure the spot chosen is safe for
drilling. Do not cut through surfaces that have hazards
concealed behind them, such as electrical wiring,
conduits or plumbing. If you are not sure, consult a
professional installer before you proceed.
W
A
R
N
IN
G
: Make sure the spot chosen is safe for
drilling. Do not cut through surfaces that have hazards
concealed behind them, such as electrical wiring,
conduits or plumbing. If you are not sure, consult a
professional installer before you proceed.
W
A
R
N
IN
G
: Make
sure the spot chosen
is safe for drilling. Do
not cut through
surfaces that have
hazards concealed
behind them, such
as electrical wiring,
conduits or
plumbing. If you are
not sure, consult a
professional installer
before you proceed.
W
A
R
N
IN
G
:
Make sure the spot
chosen is safe for drilling. Do not cut
through surfaces that have hazards
concealed behind them, such as
electrical wiring, conduits or plumbing.
If you are not sure, consult a
professional installer before you
proceed.
T
A
P
E
H
E
R
E
T
ran
slatio
n
s b
elo
w
T
A
P
E
H
E
R
E
English & English & TTranslationsranslations
T
A
P
E
H
E
R
E
W
A
R
N
IN
G
: Make
sure the spot chosen
is safe for drilling. Do
not cut through
surfaces that have
hazards concealed
behind them, such
as electrical wiring,
conduits or
plumbing. If you are
not sure, consult a
professional installer
before you proceed.
W
A
R
N
IN
G
:
Make
sure the spot chosen
is safe for drilling. Do
not cut through
surfaces that have
hazards concealed
behind them, such
as electrical wiring,
conduits or
plumbing. If you are
not sure, consult a
professional installer
before you proceed.
W
A
R
N
IN
G
: Make sure the spot
chosen is safe for drilling. Do not cut
through surfaces that have hazards
concealed behind them, such as
electrical wiring, conduits or plumbing.
If you are not sure, consult a
professional installer before you
proceed.
TAPE
HERE
TAPE
HERE
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
DO NOT
CUT AROUND
GRAY AREA
Speakers
Rectangular
speaker grilles
Rectangular
template
Round speaker grilles
Round speaker frames
Round
template
Rectangular
paint shield
Round paint shield
Speaker cord**
Sturdy wire
(such as a coat hanger)
that is 22 inches long
Half-inch spade bit
Carpenter’s level*
Phillips-head
screwdriver
Sharp pencil
Keyhole saw****
Protective eyewear
Painter’s tape***
Wire cutter/stripper
Tape measure
*Carpenter’s level is suggested for use when installing speakers in a wall.
**Speaker cord specifications are provided in “Using speaker cord,” beginning on page 11.
***Painter’s tape or other tape with light adhesive that will not damage paint or wallpaper.
****Cutting tool – For drywall: a keyhole saw, drywall saw, rotary cutting tool, or jigsaw
For plaster and lath: a saber saw or a rotary cuttin
g tool
Power drill
HD OG.book Page 5 Tuesday, July 8, 2003 3:43 PM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose 191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose 191 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose 191

Bose 191 User Manual - German - 34 pages

Bose 191 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info