Manual Bosch Zamo Set (page 37 of 502) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777049

Zoom out

Zoom in

1/502

Digital laser measure with tape

adapter

Operation

– Switch on the measuring tool (see "Switching the laser

measure on/off", page33).

uOnly use the tape adapter on clean and dust-free sur-

faces to avoid measurement inaccuracies.

Measuring length (see figures I1−I2)

After the measuring tool has been switched on, the tape exten-

sion is measured continuously. The current measured value

(g) is shown on the bottom line of the display. During continu-

ous measurement, the length of the tape can be adjusted, and

the current measured value (g) is updated on the bottom line

of the display.

The measuring process is indicated by a rolling arrow on the

display.

– Pull the tape (13) out of the adapter by the contact edge

(14) and place the tape against the object to be measured.

The visible length of tape (between the two red markings)

corresponds to the measurement length (in cm).

– Press the measuring button (1) to save the measured value.

The current measured value (g) is shown on the bottom line

of the display.

Press the measuring button (1) again to start a new meas-

urement. The current measured value (g) is shown on the

bottom line of the display, while the previous measured

value (e) is saved and shown on the top line of the display.

Note: When switching off the measuring tool, the current

measured value (g) is reset to "0", even if the tape is still

pulled out. To avoid measuring errors, always retract the tape

fully before taking a new measurement. Do not press the

English | 37

Bosch Power Tools 1 609 92A 454 | (14.06.2018)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Zamo Set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 10.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Zamo Set Manual

Product: