45
This is necessary if very little or no water flows into the
washerĆdryer.
First, reduce the water pressure in the inlet hose:
q Turn off the tap.
q Turn the programme selector to any programme
(except B Spin / Drain).
q Press the M button, and allow the programme to
run for approx. 40 seconds.
q Turn the programme selector to 0.
q Disconnect the hose from the water tap.
q Rinse the strainer under flowing water.
q Connect the hose.
q Disconnect the hose from the back of the
washerĆdryer.
q Pull out the strainer and rinse under running water.
q Insert the strainer and reconnect the hose.
q Turn on the water tap and check whether water is
still discharged. If water is leaking, check that the
filter is correctly seated.
q Turn off the tap.
Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washerĆdryer