630240
42
Zoom out
Zoom in
Previous page
1/44
Next page
en Positioning and connecting
42
Alignment
1. Loosen the lock nut in a clockwise
direction with a wrench.
2. Check the alignment of the washer
dryer with a spirit level and, if
required, correct. Adjust the height
by rotating the appliance foot.
Note: All four appliance feet must
be firmly on the floor.
The washer dryer must not wobble!
3. Tighten the lock nut against the
housing.
Grip the foot and do not adjust the
height.
Notes
The lock nuts on all four appliance
feet must be screwed tightly against
the housing!
Any loud noises, intense vibrations
or “wandering” may be due to
incorrect alignment!
Electrical connection
Electrical safety
:Warning
Risk of electric shock!
Danger of death if live parts are
touched.
When disconnecting the main plug,
always pull the plug itself and not the
cable, otherwise the cable could be
damaged.
Never touch or hold the mains plug
with wet hands.
Never pull out the mains plug during
operation.
Only connect the washer dryer to an
alternating current using a correctly
installed earthed socket.
The mains voltage must be the same
as the voltage specifications on the
washer dryer (appliance rating
plate).
The connected load and the required
fuse are also indicated on the
appliance rating plate.
Ensure that:
The mains plug and socket match.
The cable cross-section is adequate.
The earthing system has been
installed correctly.
A damaged power cord is only
replaced by an electrician.
A replacement mains cable can be
obtained from customer service.
You do not use multiple plugs/
couplings or extension cables.
If a residual-current-operated circuit
breaker is used, you use only a type
which features this symbol: z.
Only this symbol guarantees
compliance with the currently valid
regulations.
The mains plug is always accessible.
The power cord is not kinked,
crushed, altered or severed and has
not come into contact with any heat
sources.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WVG30441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WVG30441 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch WVG30441

Bosch WVG30441 User Manual - German - 44 pages

Bosch WVG30441 User Manual - Dutch - 44 pages

Bosch WVG30441 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info