642266
60
Zoom out
Zoom in
Previous page
1/64
Next page
58
Connecting the water m Risk of electric shock!
To prevent leaks or water damage, it is essential to
follow the instructions in this chapter!
Water inlet hose Caution
Operate the washer-dryer with cold drinking water only.
Do not connect to the mixer tap of an unpressurised
hot-water apparatus.
If in doubt, have the appliance connected by a
specialist.
Do not use a used inlet hose. Only use the inlet hose
supplied or one which was purchased from an
authorised specialist dealer.
The water inlet hose must not be
kinked or crushed,
modified or severed (strength is no longer
guaranteed).
Plastic threads must only be tightened by hand. Do not
remove the strainers from the water supply hose.
Check the mains water pressure:
The water pressure should be between 1 and 10
bars (when the tap is turned on, at least 8 litres of
water is discharged per minute).
If the water pressure is higher, install a pressure
reducing valve.
Connect the water supply hose
to the rear panel of the washer-dryer and ...
to the tap.
After connecting the water inlet hose: Turn on the
water tap completely, and check connection points
for water-tightness.
min. 10 mm
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WVD24460 Avantixx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WVD24460 Avantixx in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info