773221

Bosch WTS86500GB Manual

2
Zoom out
Zoom in
Previous page
1/10
Next page
8
Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
Your dryer has unwrinkling and refreshing programmes that can be used for reducing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
Sorting the laundry according to size, weight, fabric and colour is necessary.
Only use Short spin/Refresh for fabrics with the same properties.
During steam generation (required), additional noises may occur.
The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
ʑw Steam Dry
Minimum Iron Shirt
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if non-iron appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
Minimum Iron Daily Load
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if non-iron appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
ʑH Steam Refresh
Business
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine a see the care label. The programme only refreshes fabrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
Freshen up
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers a see the care label. The programme refreshes fabrics only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
9
Steam Drying - Steam Refresh
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required
Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Dry - Steam Refresh cycle.
1. Move the programme selector to Steam Dry
or Steam Refresh.
The u symbol appears in the display.
2. Remove the condensation tank completely.
Before every Steam Dry - Steam Refresh cycle, fill the water tank with
distilled water only. Do not use tap water, condensation or additives.
3. Fill the water tank. Use the jug supplied.
If the water tank filter is dirty aclean the filter in the water tank.
See page 4.
4. Pour the distilled water into the filling hole on the water tank,
until the u symbol goes out on the display panel.
If drying the recommended load, approximately 250 to 300 ml of distilled
water is used in the Steam Dry - Steam Refresh programmes.
5. Insert the condensation container all the way.
6. Start the Steam Dry or Steam Refresh programme.
10
Installation
Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
Check dryer for transport damage.
The dryer is heavy. Do not attempt to lift it on your own.
Be careful to avoid sharp edges.
Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
If in doubt, have the appliance connected by a specialist.
Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
Setting up the dryer
The appliance plug must always be accessible.
Ensure that the appliance is installed on a clean, level
and firm surface.
Keep the cooling grille on the front of the dryer
clear.
Keep the area around the dryer clean.
Level the dryer using the threaded feet.
Use a spirit level.
Do not remove the threaded feet under any
circumstances.
Mains connection see safety information a Page 13.
Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
The mains voltage and the voltage shown on the rating plate (aPage 11) must be the same.
The connected load and necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
1. Empty the condensation container aPage 4.
2. Select any programme using the programme selector.
3. Press the Start/Stop button a condensation is pumped into the container.
4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to Off.
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
1.
Make sure that the air inlet
remains unobstructed
Clean and level
Do not install the dryer behind a door or sliding
door, which could prevent or restrict opening of the
dryer door. This will prevent children from locking
themselves in and putting their lives in danger.
2.
Do not operate the dryer if there
is a danger of frost.
11
Technical data
ʠDimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2800 W
Fuse protection 13 A
Ambient temperature 5 - 35 °C
Product number
Production number Inside of door
The rating plate can be found on the back of the dryer.
ʠConsumption rates These are guide values determined under standard
conditions.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
Cottons 8 kg
Cupboard Dry* 1400 (approx. 50 %) 105 3.74
1000 (approx. 60 %) 122 4.49
800 (approx. 70 %) 139 5.17
Iron Dry* 1400 (approx. 50 %) 83 2.24
1000 (approx. 60 %) 100 3.44
800 (approx. 70 %) 117 3.86
I Easy-Care 3.5 kg 1000 39 1.05
Cupboard Dry* 800 (approx. 40 %) 42 1.35
600 (approx. 50 %) 51 1.65
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ʠDrum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb aPage 12.
Optional accessories (order from the after-sales service using the order number)
Connecting kit for condensation outlet
The condensation is drained off immediately via a hose.
Washer-dryer stack connection set
The dryer can be stacked on top of a suitable washing machine of the same depth and width,
to save space. The dryer must be secured to the washing machine with this connection set.
With pull-out worktop: WTZ 11300
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
WTZ
1110
WTZ
11310
WTZ
10290
12
What to do if...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed after-sales service directory, or by
calling one of these numbers:
GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
ʠThe Start/Stop indicator light
does not come on.
Mains plug plugged in?
Programme selected?
ʠThe ā symbol and Start/Stop
indicator light are flashing.
Empty the condensation container a Page 4.
Check the condensation outlet hose, if applicable (kink).
ʠThe 4 symbol and Start/Stop
indicator light are flashing.
Clean the air cooler aPage 6 Cleaning and care. Clean the
fluff filter aPage 4.
ʠThe u symbol flashes. Is the water tank empty?
Filling with distilled water a Page 9.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank aPage 4.
ʠThe Steam Dry - Steam Refresh
does not start.
ʠDryer does not start. Has the Start/Stop button been pressed? Is the door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠWater is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ʠThe door opens by itself. Push the door closed until you hear it click into place.
ʠItems crease even though the
Steam Dry - Steam Refresh
programme has been selected.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
ʠCreasing. Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
Unsuitable programme selected a Page 7.
ʠDrying result is not satisfactory
(laundry feels too damp).
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
drying programme or, in addition, select the time programme
aPage 7.
Use fine adjustment for the drying result aPage 1/2.
Fine layer of limescale on the humidity sensors
a Clean the humidity sensors aPage 6.
Programme termination, e.g. tank full, mains power supply
failure, door open or maximum drying time reached.
ʠDrying time too long. Rinse the fluff filters under running water a Page 4.
Insufficient supply of air a ensure that air can circulate.
Air inlet possibly blocked a Clear inlet aPage 10.
Ambient temperature higher than 35 °C a ventilate the room.
ʠThe humidity in the room increases
significantly.
Make sure the room is sufficiently ventilated.
ʠOne or more programme status
indicator lamps are flashing.
Clean the filter and air cooler under running water aPage 4/6.
Check the installation conditions aPage 10.
Switch off, allow to cool, switch on again and restart the
programme.
ʠThe interior light (depending on the
model) does not work.
Unplug the appliance plug, fold back the cover cap on the inside
above the door (using a Torx 20 screwdriver)
and replace the bulb. Close the cover cap.
13
Safety instructions
Emergency
Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
in rooms inside the house.
for drying or unwrinkling/refreshing fabrics.
The dryer must
NEVER...
be used for purposes other than those described above.
be modified in terms of its technology or properties.
Hazards
The dryer must not be used by children or persons who have not been
instructed in its use.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
Remove all objects from pockets,
and lighters in particular a risk of explosion.
Do not lean or sit on the door a risk of tipping.
Open the door carefully. Hot steam may escape. The clothes and drum may
be hot a risk of burns.
Installation
Secure loose leads or hoses, otherwise there is a risk of tripping.
Below 0 °C there is a possibility of frost damage.
Mains
connection
Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appliance is completely safe.
The cable cross-section must be sufficient.
Only use earth-leakage circuit breakers with the following symbol:
The appliance plug and socket must be compatible.
Do not use multiple plugs/connectors and/or extension cables.
Do not touch or hold the appliance plug with wet hands
a risk of electric shock.
Never pull the appliance plug out of the socket by its cable.
Do not damage the mains lead a risk of electric shock.
Operation
Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) a fire/explosion hazard.
Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
a risk of explosion.
Do not put laundry containing foamed material/rubber in the dryer a elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
Switch off the dryer once the programme has ended.
For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
Distilled/condensation water is not for drinking.
Defect
Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket a risk of electric shock.
Spare parts
Only use genuine spare parts and accessories for safety reasons.
Disposal
Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
Packaging: keep all packaging out of reach of babies and children.
a danger of suffocation.
All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.
Dryer
en Instruction manual
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WTS86500GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WTS86500GB in the language / languages: English as an attachment in your email.

The manual is 2.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info