550925

Bosch WIS24141 - 8 Logixx Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
7
Overview of programmes aObserve table of consumption values on Page 8 and instructions on Page 6!
Programmes °C max.
Type
Additonal functions; information
L Cottons 20 - 90 °C
7 kg *
Hard-wearing textiles, heat-resistant textiles
made of cotton or linen
Eco
+
, 7 Prewash, S Reduced Ironing, = Aqua Plus
L Cottons ~ 40, 60 °C
Easy-Care 30 - 60 °C
3.5 kg *
Easy-care textiles made of cotton, linen, synthetic
fibres or blended fabrics
Eco
+
, 7 Prewash, S Reduced Ironing, = Aqua Plus
/ Mixed Load
30 °C Textiles made of cotton or easy-care textiles
Eco
+
, 7 Prewash, S Reduced Ironing, = Aqua Plus
Different types of washing can be washed together
Delicates/Silk 30 °C
2 kg
For delicate, washable textiles, e.g. made of silk,
satin, synthetic fibres or blended fabrics
(e.g. curtains)
Eco
+
, 7 Prewash, S Reduced Ironing, = Aqua Plus
No spin cycle between the rinse cycles
: Wool cold, 30 °C
Hand or machine-washable wool or rich-wool
textiles
Especially gentle wash programme to prevent shrinkage, longer
programme pauses (textiles rest in wash liquor)
Additional programmes 2 Rinse/Freshen Up, Spin, = Drain
The programmes are time-controlled for lightly soiled textiles. If textiles are heavily soiled, reduce the load or select additional function, e.g. Eco
+
.
When washing at maximum load using programmes marked with *, always select Eco
+
additional function.
Irrespective of the type of washing, Easy-Care 40 °C at max. selectable spin speed is best suited as a short programme.
Programmes without Prewash – pour detergent into dispenser II, programmes with Prewash – divide detergent between dispensers I and II.
9401 / 9000959112
*959112*
WIS24141GB
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München/Deutschland
8
Safety instructions
– Read and follow the operating and installation instructions and all other information
enclosed with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock
– Never pull out the mains plug by tugging the power cord!
– Insert/pull out the mains plug with dry hands only.
Danger to life
On redundant appliances:
– Pull out the mains plug!
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing-machine door. This will prevent
children from locking themselves in and suffocating.
Risk of suffocation
– Keep packaging, plastic film and packaging parts out of the reach
of children.
Risk of poisioning
– Keep detergents and care products out of the reach of children.
Risk of explosion
– Caused by detergents containing solvents, e.g. stain remover/
items of washing pretreated with solvent naphtha may result in an
explosion after being loaded into the washing machine.
Before hand thoroughly rinse items of washing by hand.
Risk of injury
– Washing machine door may become very hot.
– Caution when draining hot detergent solution.
– Do not climb on the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum in case it is still rotating.
Consumption values
Programme Additonal function Load Current*** Water***
Programme
duration
***
L Cottons 20 °C
- 7 kg 0,21 kWh 77 l 1 @ h
L Cottons 40 °C*
Eco
+
7 kg 0,78 kWh 77 l 2 @ h
L Cottons 60 °C
- 7 kg 1,30 kWh 77 l 1 B h
L Cottons 90 °C
- 7 kg 2,26 kWh 90 l 2 h
Easy-Care 40 °C*
Eco
+
3,5 kg 0,58 kWh 57 l 1 @ h
Delicates/Silk 30 °C
- 2,0 kg 0,17 kWh 30 l B h
: Wool 30 °C
- 2,0 kg 0,20 kWh 40 l B h
* Programme setting for test according to currently valid European standard 60456.
Information about comparability tests:
To test the test programmes, wash indicated load, with Eco
+
additional function
and at maximum selectable spin speed.
Programme Additonal function Load
Annual energy
consumption
Annual water
consumption
L Cottons Eco ~
Eco
+
**
7/3.5 kg 220 kWh 11000 l
** Programme setting for testing and energy labelling according to directive 2010/30/EU with cold
water (15 °C).
***The values deviate from the indicated values depending on water pressure, water hardness, water
inlet temperature, room temperature, type and amount of washing and degree of soiling, utilised
detergent, fluctuations in the mains voltage and selected additional functions.
9
Insert for liquid detergent depending on model
Position insert for dosing liquid detergent:
– Completely remove detergent drawer. aPage 10
– Push insert forwards.
Do not use insert (push upwards):
– For gel-like detergents and washing powders,
– For programmes with 7 Prewash.
Care
ʑ
Machine housing, control panel
– Remove detergent residue immediately.
– Wipe with a soft, damp cloth.
– Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener residue.
1. Pull out, depress insert, take out drawer all the way.
2. Take out insert: using your finger, press insert upwards.
3. Clean detergent dispenser and insert with water and a brush and dry.
4. Attach insert and lock into position (push cylinder onto guide pin).
5. Slide in the detergent dispenser.
Leave detergent drawer open so that residual water can evaporate.
ʑ
Drum
Leave washing machine door open so that the drum can dry out.
Use chlorine-free cleaning agent, not steel wool.
ʑ
Descaling No washing in the machine!
Not required if detergent dosed correctly. However, if this does occur, follow the instructions
of the descaling agent manufacturer. Suitable descalers can be purchased on our website
or from customer service.
Information about the indicator lights depending on model
A signal sounds and the indicator lamps for spin speed and status displays flash:
¤
¤
¤
¤
¤
¤
¤
¤
¤
Close the washing
machine door
properly;
washing may
be caught.
¤
¤
¤
¤
¤
¤
¤
¤
¤
Turn on tap fully, supply
hose kinked/jammed;
clean filter aPage 10,
water pressure too low.
¤
¤
¤
¤
¤
¤
¤
¤
¤
Drain pump blocked;
clean drain pump.
aPage 10
Drainage hose/outlet
pipe blocked; clean
drainage hose on the
siphon. aPage 10
¤
¤
¤
¤
¤
¤
¤
¤
¤
Water in the base
pan, appliance
leaking. Call
customer service!
¤
¤
¤
¤
¤
¤
¤
¤
¤
or
¤
¤
¤
¤
¤
¤
¤
¤
¤
or
¤
¤
¤
¤
¤
¤
¤
¤
¤
Motor fault. Call
customer service!
Other displays: Switch off appliance, wait 5 seconds and switch on again.
If the display is indicated again, call customer service. aInstallation Instructions
– Risk of electric shock! Pull out the mains plug!
– Risk of explosion! No solvents!
10
Maintenance
Detergent-solution pump
Set programme selector to Off, pull out the mains plug.
1. Take the drainage hose out of the holder.
Remove sealing cap, allow detergent solution to flow out.
Put the closing cap back on the hose.
2. Carefully unscrew the pump cover (residual water).
3. Clean the interior, pump cover thread and pump housing
(fan impeller in the detergent-solution pump must rotate).
4. Reinsert and screw on pump cover.
Handle is upright. Insert the drain hose into the holder.
To prevent unused detergent from flowing into the outlet during the next wash:
Pour 1 litre of water into dispenser II and start the > Drain programme.
Drainage hose on the siphon
Set programme selector to Off, pull out the mains plug.
1. Loosen hose clip, carefully remove drainage hose (residual water).
2. Clean drainage hose and siphon spigot.
3. Re-attach drainage hose and secure connection point with hose clip.
Filter in the water inlet hose
Risk of electric shock!
Do not immerse Aqua-Stop safety device in water (contains electric valve).
Release water pressure in the supply hose:
1. Turn off the tap!
2. Select any programme (except Spin/> Drain).
3. Select $ Start/Pause. Leave programme for approx. 40 seconds.
4. Turn the programme selector to Off. Pull out the mains plug!
Clean the filter:
5. Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6. Connect the hose and check for leaks.
– Risk of scalding!
Allow detergent solution to cool down!
– Turn off the tap!
11
What to do if …
ʑ
Water is running out. – Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
– $ Start/Pause not selected?
– Tap not open?
– Filter blocked? Clean the filter. aPage 10
– Supply hose kinked or jammed?
ʑ
Washing-machine door
cannot be opened.
– Safety function active. Stop programme? aPage 4
– Rinse Hold (without final spin) selected? aPage 3, 4
– Can be opened via emergency release only? aPage 6
ʑ
Programme does not start. – $ Start/Pause not selected?
– Door closed?
ʑ
Detergent solution is not
drained.
– Rinse Hold (without final spin) selected? a Page 3, 4
– Clean the drain pump. aPage 10
– Clean outlet pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
– Not a fault – water below the visible area.
ʑ
Spin result not satisfactory,
washing wet/too damp:
– Not a fault – unbalanced load detection system has stopped the spin
cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
– S Reduced Ironing is selected? aPage 5
– Too low speed selected? aPage 5
ʑ
The programme duration
changes during the wash
cycle.
– Not a fault – the programme sequence is optimised for the particular
wash process. This may result in changes to the programme duration
in the display field.
ʑ
Spin cycle actuated several
times.
– Not a fault – unbalanced load detection system adjusts imbalance.
ʑ
Residual water in the
dispenser for care
product ~.
– Not a fault – effect of the care product not impaired.
– If required, clean insert. aPage 9
ʑ
Odour formation in the
washing machine.
– Run L Cottons 90 °C programme without washing.
Use standard detergent.
ʑ
Foam is coming out of the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour into
dispenser II (not for outdoor, sports and down-filled textiles!).
– Reduce detergent dosage for the next wash cycle.
ʑ
Loud noise formation,
vibrations and “Wandering”
during spin cycle.
– Appliance feet fixed?
Secure appliance feet. aInstallation Instructions
– Transportation protection devices removed?
Remove transportation protection devices. aInstallation Instructions
ʑ
Noises during spin
and drain cycles.
– Clean the drain pump. aPage 10
ʑ
Indicator lights do not
function while the
appliance is running.
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
ʑ
The programme takes
longer than usual.
– Not a fault – unbalanced load detection system adjusts imbalance
by repeatedly distributing the washing.
– Not a fault – foam detection system active – a rinse cycle is
switched on.
ʑ
Detergent residue on the
washing.
– Occasionally phosphate-free detergents contain water-insoluble
residue.
– Select 2 Rinse/Freshen Up or brush the laundry after washing.
ʑ
In the pause status
$ Start/Pause flashes
very quickly and a signal
sounds.
– Water level too high. Washing cannot be reloaded.
Immediately close washing machine door.
– Select $ Start/Pause to continue the programme.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Set programme selector to Off and pull out the mains plug.
– Turn off the tap and call customer service. aInstallation Instructions
en operating instructions
Washing machine
WIS24141GB
Observe the safety instructions on page 8
Read these instructions and the separate installation instructions before
operating the washing machine
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WIS24141 - 8 Logixx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WIS24141 - 8 Logixx in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info