303920
22
Zoom out
Zoom in
Previous page
1/48
Next page
The wash cycle does not start
Machine does not fill with water
Washing result is unsatisfactory
Foam comes out of the detergent
drawer
Foam is visible after the final
rinse
Unexpected motor noises
Pump noises
The machine vibrates when wasĆ
hing or spinning
The appliance does not spin or
drain the used water.
The door does not open
The machine does not fill with
water
22
en
Malfunctions with simple solutions
! Repairs to electrical appliances must only be carried out by qualified specialists.
Repairs carried out incorrectly can be dangerous.
Malfunction
Possible cause / Remedy
The On/Off light does not
come on
- The appliance plug is not inserted in the socket or not fully
inserted in the socket.
- The fuse has blown.
- Electrical power failure.
Electrical power failure In the event of a power failure or appliance malfunction,
emergency draining is possible (refer to the «Cleaning the
discharge pump» section, so that the laundry can be removed
from the machine).
The «Start
» button is not depressed.
The door is not closed.
This is not a malfunction. The water remains below the visible
area in the machine.
Abnormally high degree of soiling.
Insufficient detergent. Measure the detergent according to the
manufacturer's instructions.
Select the most appropriate temperature and wash programme
for the laundry.
Too much detergent was used. Switch the machine off for 5 Ć
10 minutes. Prevent foam building up by putting a tablespoon
of fabric softener and half a litre / 1 pt of water into the deterĆ
gent drawer. Reduce the detergent dosage in the next wash.
Some detergents produce a large quantity of foam although
this has no effect on the rinsing result.
This is not a malfunction. During the heating stage, the motor
produces noises characteristic of starting.
This is not a malfunction. These noises are characteristic of the
machine starting and the pump discharging.
The transport securing devices have not been removed. See
the machine installation instructions.
The adjustable feet on the machine were not fixed during instalĆ
lation of the appliance. Align the machine using a spirit level and
fix the feet as indicated in the installation instructions.
The outlet pump is blocked. The outlet pipe is bent or blocked.
The safety device is activated. The «Rinse hold /
» option
has been selected.
The tap is closed. The water inlet filters are dirty.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch wfd 2460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch wfd 2460 in the language / languages: English, French as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch wfd 2460

Bosch wfd 2460 User Manual - English, German, Italian, Swedish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info