746715
11
Zoom out
Zoom in
Previous page
1/76
Next page
Preventing material damage en
11
Preventing material damage
Preventing material dam-
age
Preventing material damage
Follow these instructions to avoid ma-
terial damage and damage to the ap-
pliance.
ATTENTION!
¡The functionality of the appliance
may be impaired if you use the
wrong quantity of fabric softener,
detergent, care product or clean-
ing agent.
Follow the dosage recommend-
ations from the manufacturer.
¡Exceeding the maximum load ca-
pacity impairs the function of the
appliance.
Observe the "maximum load ca-
pacity" →Page29 for each
programme and do not exceed
it.
¡The appliance is secured for trans-
portation using transit bolts. Transit
bolts which have not been re-
moved may result in material dam-
age and damage to the appliance.
Before starting up the appliance,
remove the transit bolts com-
pletely and keep them in a safe
place.
Before transport, fit the transit
bolts fully in order to prevent
damage in transit.
¡Material damage may be caused if
the water inlet hose is connected
incorrectly.
Tighten the screw connections
on the water inlet until they are
hand-tight.
Ideally, connect the water inlet
hose directly to the water tap,
without any additional connect-
ing elements such as adapters,
extensions, valves or similar.
Ensure that the inner diameter
of the water tap is at least 17
mm.
Make sure that the length of the
thread on the connection to the
water tap is at least 10 mm.
¡If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
Make sure that the water pres-
sure in the water supply system
is min. 100kPa (1bar) and
max. 1000kPa (10bar).
If the water pressure exceeds
the maximum value specified, a
pressure-reducing valve must be
installed between the drinking
water connection and the hose
set of the appliance.
Do not connect the appliance to
the mixer tap of an unpressur-
ised hot-water boiler.
¡Modified or damaged water hoses
may result in material damage and
damage to the appliance.
Never kink, crush, modify or cut
through water hoses.
Only use the water hoses sup-
plied with the appliance or genu-
ine spare hoses.
Never re-use water hoses that
have been used before.
¡Operating the appliance using wa-
ter that is dirty or too hot may
cause material damage.
Only operate the appliance with
cold mains water.
¡Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use harsh or abrasive
detergents.
Do not use cleaning products
with a high alcohol content.
Do not use hard scouring pads
or cleaning sponges.
Clean the appliance with nothing
but water and a soft, damp
cloth.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WAX32EH1GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WAX32EH1GB in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info