653808
31
Zoom out
Zoom in
Previous page
1/32
Next page
Positioning and connecting en
31
Before washing for the first
time
The washing machine was thoroughly
tested before leaving the factory. In
order to remove any water which may
be left over from the test, run the first
washing cycle without any laundry.
Notes
The washing machine must be
correctly installed and connected.
(from ~ Page 24).
Never use a damaged machine.
Inform your after-sales service.
1. Check the machine.
2. Plug in the mains plug.
3. Turn the tap on.
4. Close the washing machine door (do
not load any laundry).
5. Select the Cottons programme and
90 °C as the temperature.
6. Open the detergent drawer.
7. Pour approx. 2 litre of water into
compartment II.
8. Pour standard detergent into
compartment II.
Note: Prevent foaming by only using
half of the amount of detergent
recommended by the detergent
manufacturer. Do not use detergent
for wool or delicates.
9. Close the detergent drawer.
10.Press the Start button.
11.When the programme ends, switch
off the appliance.
Your washing machine is now ready to
use.
Transportation
e.g. when moving home
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply ~ Page 20
3. Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked ~ Page 19
4. Disconnect the washing machine
from the mains.
5. Remove the hoses.
Installing the transport locks:
1. Remove the covers and keep in a
safe place.
If required, use a screwdriver.
2. Insert all four sleeves.
Clamp the mains cable on the
holders. Insert and tighten the bolts.
Before commissioning:
Notes
The transport locks must be
removed.
To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour approx. 2 litre of
water into compartment II and start
the Empty programme.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WAQ28468 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WAQ28468 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch WAQ28468

Bosch WAQ28468 User Manual - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info