647579
25
Zoom out
Zoom in
Previous page
1/44
Next page
Programme default settings en
25
0 Programme default
settings
Programme default settings
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.
You can change the default settings by
repeatedly pressing the corresponding
buttons until the required settings are
displayed in the display panel.
Note: Pressing and holding the button
automatically runs through the setting
values until the last one. Press the
button once more and you will be able
to change the setting values again.
The available settings vary depending
on the model.
You can find an overview of all settings
available for selection in each
programme on the supplementary sheet
for the operating and installation
instructions.
Temperature
(°C, Temp. °C, Temperatura)
Depending on what stage the
programme is in, you can change the
set temperature before and at the
beginning of the programme.
Notes
The maximum temperature that can
be set depends on the programme
that has been selected.
The remaining time may be
increased or decreased according to
the changed temperature values.
Spin speed
(0, Centrif., Velocidad de centrifugado,
Rotação de centrifugação)
Depending on what stage the
programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme.
Setting : The rinsing water is drained
but there is no spin. The laundry stays
wet inside the drum, e.g. for items that
should not be spun.
Setting - - -: (Rinse Stop) = no final
spin. The laundry stays in the water after
the final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
~ "Programme end during Rinse Stop"
on page 31
Note: The maximum speed that can be
set depends on the model and
programme that has been selected.
Ready in
(ñ, Terminado en, Tiempo de
Finalización en, Terminado em, Pronto
em-tempo)
Before starting the programme, you
can preselect the programme end
("Ready in" time) in hourly increments (h
= hour) up to a maximum of 24 hours.
To do this:
1. Select a programme.
The programme duration is
displayed for the selected
programme, e.g. ƒ:„‹
(hours:minutes).
2. Press the Ready in button
repeatedly until the required number
of hours is displayed.
3. Press the Inicio/Pausa A (Start/
Reload) button.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WAN24260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WAN24260 in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info