11
en
Start time
Before a programme begins, the number of
hours the programme start must be delayed
(start time) may be specified.
m Set the programme selector control to the
desired programme. The warning light «preĆ
parado-lavar» flashes. The screen shows
the time remaining.
m Press the "" button. The screen shows 0
h" ( =hour).
m Press the "" button once more to select the
required start time.
! The start time may be programmed in blocks
of 1 hour. The start may be delayed up to 24
hours. If a start time has been programmed
to 24 hours, it can be returned to 0 h" by
pressing the "" button once more.
The start time begins to run after pressing the
«Inicio M» button. The cursor which is between
the number and the "h" and the pilot lights
«Inicio M» and «preparado-lavar» flashes until
the start time finishes and the programme
begins. These indicators then come on
continuously.
! The start count down is performed in hours.
When the time comes for starting, the
programme starts automatically and the time
remaining appears.
The start time may be modified at any time before
the programme begins.
m Press the "" button until the required time
appears. The selected programme will not be
modified.
! If the programme is modified, the start time
will also be annulled. The screen then shows
the time remaining. If necessary, restart the
start time.
While the start time is activated, it is possible to
put laundry in or remove laundry from the
washing machine. Close the door immediately
after loading or emptying the drum.
