Manual Bosch UniversalVac 18 (page 11 of 111) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707898

Zoom out

Zoom in

1/111

switches the cordless dust extractor off when the battery is

drained.

The battery must be removed from the vacuum cleaner to

charge it.

u Do not continue to press the on/off button after the

vacuum cleaner has automatically switched itself off.

This can damage the battery.

The battery features NTC temperature monitoring, which

only permits charging in a temperature range between 0 °C

and 45 °C. This achieves a long battery life.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Follow the instructions on correct disposal.

Battery charge indicator

When the on/off switch (2) is pressed in completely, the bat-

tery charge indicator (3) indicates the battery's state of

charge for several seconds. The indicator consists of three

green LEDs.

LED Capacity

Continuous lighting 3x green ≥ 66%

Continuous lighting 2x green 33–66%

Continuous lighting 1x green 11–33%

Slowly flashing light 1 x green ≤ 10%

Inserting and Removing the Battery

u Do not use force to insert the battery. The battery is de-

signed in such a way that it can only be inserted into the

vacuum cleaner when it is in the right position.

– Insert the charged battery (4) into the vacuum cleaner

until you feel it engage and it is securely locked in place.

– To remove the battery (4), press the release button(12)

on the battery and pull it out of the vacuum cleaner as

shown in the image (see figure A). Do not use force to do

this.

Fitting the vacuum cleaner accessories (see

figure B)

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

The vacuum cleaner accessories can be directly connected

with the dust container(6).

See the illustration for the different ways of combining the

vacuum cleaner accessories.

– Insert the individual vacuum cleaner accessories firmly

into the connection on the dust container(6) and into one

another.

Operation

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

Start-up

u Before extraction, ensure that the filter unit is se-

curely fitted.

u Do not use damaged filters (e.g. no cracks, small

holes, etc.). Replace any damaged filters immedi-

ately.

Switching on/off

– To switch on the vacuum cleaner, press the on/off but-

ton(2).

– To switch off the vacuum cleaner, press the on/off but-

ton (2) again.

Maintenance and Servicing

Maintenance and cleaning

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

u To ensure safe and efficient operation, always keep

the dust extractor and the ventilation slots clean.

– Clean the housing of the vacuum cleaner occasionally

with a damp cloth.

– Clean dirty charging contacts using a dry cloth.

Cleaning the Dust Container (see figures C1–C2)

Clean the dust container (6) after each use in order to en-

sure that the vacuum cleaner continues to perform optim-

ally.

– Hold the vacuum cleaner down slightly so that dust can-

not fall out of the dust container when the vacuum cleaner

is opened.

– Press the release button(1) and remove the dust con-

tainer(6) from the motor housing(5).

– Shake out the dust container (6) over a suitable waste

bin.

– If necessary, clean the filters(see "Cleaning the filters

(see figuresD1 – D4)", page11).

– Then fit the dust container into the bottom of the motor

housing and apply light pressure to the dust container un-

til you hear it click into place.

Cleaning the filters (see figuresD1 – D4)

The fine dust filter(16) must not be wet cleaned.

– Hold the vacuum cleaner down slightly so that dust can-

not fall out of the dust container when the vacuum cleaner

is opened.

– Press the release button(1) and remove the dust con-

tainer(6) from the motor housing(5).

– Brush the coarse dirt filter(14).

English | 11

Bosch Power Tools 1 609 92A 4E3 | (13.08.2018)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalVac 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalVac 18 Manual

Product: