Manual Bosch UniversalSaw 18V 70 (page 17 of 249) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777032

Zoom out

Zoom in

1/249

English | 17

Technical data

Jigsaw EasySaw 18V-70

Article number 3603K120..

Stroke rate control ●

Rated voltage V= 18

No-load stroke rate n₀ min−1 2600

Stroke mm 20

Max. cutting depth

– in wood mm 70

– in aluminium mm 15

– in steel (unalloyed) mm 6

Max. cutting angle (left/right) ° 45

Weight according to EPTA-Pro-

cedure01:2014A) kg 1.7 (1.5Ah)–

2.0 (6Ah)

Recommended ambient temper-

ature during charging °C 0to+35

Permitted ambient temperature

during operationB) and during

storage

°C –20to+50

Recommended rechargeable bat-

teries PBA 18V…W-.

Recommended battery char-

gersC) AL 18…

A) Depends on battery in use

B) Limited performance at temperatures <0°C

C) The following chargers are not compatible with the PBA re-

chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to

EN62841‑2‑11.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 82dB(A); sound power level

93dB(A). Uncertainty K=5dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN62841‑2‑11:

Cutting boards with saw bladeT144D:

ah,B = 8.5m/s2, K = 2.5m/s2,

cutting sheet metal with saw blade T118A:

ah,M = 10m/s2, K = 2m/s2.

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Battery Charging

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

uDo not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

To remove the battery (4), press the release button (5) and

pull the battery upwards and out of the power tool. Do not

use force to do this.

Battery charge indicator

The battery charge indicator (3) indicates the charge condi-

tion of the battery when the power tool is switched on. It

consists of three green LEDs.

LEDs Capacity

3 × continuous green light 66–100%

2 × continuous green light 33–66%

1 × continuous green light 11–33%

1 × slowly flashing green light 0–10%

The three LEDs in the battery charge indicator (3) flash

quickly when the temperature of the battery is outside the

operating temperature range of −20 to +50°C and/or the

overload protection has been triggered.

Bosch Power Tools 1 609 92A 64Y | (12.07.2021)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalSaw 18V 70 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 7.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalSaw 18V 70 Manual

Product: