Manual Bosch UniversalRotak 650 (page 14 of 254) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777039

Zoom out

Zoom in

1/254

14 | English

For increased electrical safety use a

Residual Current Device (RCD) with a

tripping current of not more than

30mA. Always check your RCD every

time you use it.

Keep the supply cables away from

moving hazardous parts and avoid

damage to the cables; this can lead to

contact with live parts.

The connections (plugs and sockets)

should be kept dry and off the ground.

The supply cables must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cable on the product is

damaged, it must only be replaced by

a Bosch Service Centre. Only use ap-

proved extension cables.

Use only extension cords, cables,

leads and cable reels that comply with

EN 61242/IEC 61242 or IEC

60884-2-7 and are of type H05VV-F

or H05RN-F.

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– Nominal conductor area of

1.25mm2 or 1.5mm2

– Maximum length 30m for a Cord

Extension Set or maximum length

of 60m for a Cable Reel with Re-

sidual Current Device (RCD).

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service

Centre.

WARNING! Inadequate ex-

tension cables can be dan-

gerous. Extension cable,

plug and socket must be of water-

tight construction and intended for

outdoor use.

Maintenance

uAlways wear gardening gloves

when handling or working near the

sharp blades.

uKeep all nuts, bolts and screws tight

to ensure safe working with the

product.

uCheck the grass catcher frequently

for wear or deterioration.

uInspect the product and replace

worn or damaged parts for safety.

uEnsure replacement cutting means

of the right type are used.

uEnsure replacement parts fitted are

Bosch-approved.

uBefore storing, make sure that the

product is clean and free of residue.

If necessary, clean with a soft dry

brush.

Symbols

The following symbols are important for reading and under-

standing the original instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the product in a better and safer

manner.

1 609 92A 5W8 | (15.07.2020) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalRotak 650 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 5.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalRotak 650 Manual

Product: