Manual Bosch UniversalRotak 550 (page 14 of 266) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708192

Zoom out

Zoom in

1/266

14 | English

u Never touch the mains plug with wet

hands.

u Do not run over, crush or pull the

power supply cord or extension

cord, otherwise it may be damaged.

Protect the cable from heat, oil and

sharp edges.

u The extension lead must have a cross

section in accordance with the oper-

ating instructions and be protected

against splashed water. The connec-

tion must not be in water.

u Always wear gardening gloves

when handling or working near the

sharp blades.

Electrical Safety

Warning! Switch the

product off and pull the

mains plug before any main-

tenance or cleaning. The same ap-

plies when the mains cable is dam-

aged, cut or entangled.

u The blade continues to rotate for a

few seconds after the machine is

switched off.

u Caution do not touch the rotating

blade.

Your product is double insulated for

safety and requires no earth connec-

tion. The operating voltage is 230V

AC, 50Hz (for non-EU countries

220V, 240V as applicable). Contact

your Bosch Service Centre for details.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service

Centre.

For increased electrical safety use a

Residual Current Device (RCD) with a

tripping current of not more than

30mA. Always check your RCD every

time you use it.

Keep the supply cables away from

moving hazardous parts and avoid

damage to the cables; this can lead to

contact with live parts.

The connections (plugs and sockets)

should be kept dry and off the ground.

The supply cables must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cable on the product is

damaged, it must only be replaced by

a Bosch Service Centre. Only use ap-

proved extension cables.

Use only extension cords, cables,

leads, cable reels that comply with EN

61242/IEC 61242 or IEC 60884-2-7.

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– Nominal conductor area of

1.25mm

or 1.5mm

– Maximum length 30m for a Cord

Extension Set or maximum length

of 60m for a Cable Reel with Re-

sidual Current Device (RCD).

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

1 609 92A 5BK | (04.09.2019) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalRotak 550 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalRotak 550 Manual

Product: