Manual Bosch UniversalMulti 12 Multitool (page 23 of 145) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708268

Zoom out

Zoom in

1/145

English | 23

Bosch Power Tools 1 609 92A 3AY | (3.3.17)

Removing (see figure B)

Open the AutoClic lever 1 all the way. The application tool/

accessory will be ejected.

Mounting and Adjusting the Depth Stop

The depth stop 14 can be used when working with segment

saw blades.

If required, remove an already mounted application tool/

accessory.

Slide the depth stop 14 over and beyond the tool holder 9 to

the stop onto the gear head of the power tool with the labelled

side facing upward.

The depth stop is intended for the following cutting depths:

– With segment saw blades ACZ 85 .. with a diameter of

85 mm: 8 mm, 10 mm, 12 mm and 14 mm cutting depths

(see indication on the depth stop in large font and not in

brackets).

– With segment saw blades ACZ 100 .. with a diameter of

100 mm: 14 mm, 16 mm, 18 mm and 20 mm cutting

depths (see indication on the depth stop in smaller font

and brackets).

Insert the appropriate segment saw blade for the desired cut-

ting depth. Slide the depth stop 14 from the tool holder 9 in

the direction of the application tool until you can rotate it free-

ly. Rotate the depth stop 14 so that the desired cutting depth

is above the section of the saw blade, which will be used to

saw. Slide the depth stop 14 once again to the stop onto the

gear head of the application tool.

For all other cutting depths and when working with other

application tools, remove the depth stop 14. For this, remove

the application tool and pull the depth stop from the gear

head.

Mounting the Auxiliary Handle (optional accessory)

The vibration-damped auxiliary handle enables the tool to be

used safely and more comfortably.

Screw the auxiliary handle on the right or left of the machine

head depending on the working method.

 Do not continue to use the power tool when the auxilia-

ry handle is damaged. Do not make any changes or

modifications to the auxiliary handle.

Mounting/Replacing a Sanding Sheet on the Sanding

Plate

The sanding plate 12 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the Velcro back-

ing of the sanding plate 12 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 13 flush alongside one edge of the

sanding plate 12, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 13, grasp it at one of the tips and

pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bos

h accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Sanding disc Material Application Grain size

Red quality

– All wooden materials

(e. g., hardwood,

softwood, chipboard,

building board)

– Metal materials

For coarse-sanding, e. g. of rough, unplaned beams

and boards

coarse 40

For face sanding and planing small irregularities

medium 80

100

120

For finish and fine sanding of wood

fine 180

240

320

400

White quality

–Paint

–Varnish

– Filling compound

– Filler

For sanding off paint coarse 40

For sanding primer (e. g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating

fine 180

240

320

OBJ_BUCH-2957-001.book Page 23 Friday, March 3, 2017 2:20 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalMulti 12 Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalMulti 12 Multitool Manual

Product: