Manual Bosch UniversalLevel 360 (page 20 of 246) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777053

Zoom out

Zoom in

1/246

20 | English

Automatic Levelling

Working with automatic levelling (seefigureE)

To work with automatic levelling, the automatic levelling status indicator(3) must not

light up continuously. If necessary, switch automatic levelling on again by pressing the in-

cline function button(2) so that the status indicator goes out.

Position the measuring tool on a level, firm surface or attach it to the tripod(11), or the

telescopic shaft(13).

The automatic levelling function automatically compensates irregularities within the self-

levelling range of ±4°. The levelling is finished as soon as the laser lines stop moving.

If automatic levelling is not possible, e.g. because the surface on which the measuring

tool stands deviates by more than 4° from the horizontal plane, the laser beams begin to

flash.

If this is the case, set up the measuring tool in a level position and wait for the self-level-

ling to take place. As soon as the measuring tool is within the self-levelling range of ±4°,

the laser beams will light up continuously.

It is not possible to work with automatic levelling outside the self-levelling range of ±4°,

as the levelling accuracy of the laser beams cannot be guaranteed and it cannot be guar-

anteed that the laser beams are perpendicular.

In case of ground vibrations or position changes during operation, the measuring tool is

automatically levelled again. Upon re-levelling, check the position of the horizontal or

vertical laser line with regard to the reference points to avoid errors by moving the meas-

uring tool.

Working with the incline function (seefigureF)

To work with the tilt function, press the incline function button(2). When the incline

function is engaged, the status indicator(3) lights up green.

For work with the incline function, automatic levelling is switched off. You can hold the

measuring tool freely in your hand or place it on a sloping surface. This means that the

laser beams are no longer levelled and no longer necessarily run perpendicular to one an-

other.

Working Advice

uOnly the centre of the laser line must be used for marking. The width of the laser

line changes depending on the distance.

Working with the Tripod (Accessory)

A tripod offers a stable, height-adjustable support surface for measuring. Place the

measuring tool with the 1/4" tripod mount (8) on the thread of the tripod (11) or a con-

1 609 92A 5PV | (06.03.2020) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalLevel 360 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 3.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalLevel 360 Manual

Product: