708164
17
Zoom out
Zoom in
Previous page
1/127
Next page
English | 17
u Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
u Always wait until the power tool has come to a com-
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
u Hold the power tool firmly with both hands and make
sure you have a stable footing. The power tool can be
more securely guided with both hands.
u In order to prevent the power tool from being
switched on unintentionally, always unlock the lock-
on button. To do so, briefly press the On/Off switch.
u Application tools can become hot during operation.
There is a risk of burns when changing the application
tool. Use protective gloves to remove the application
tool.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for impact drilling in brick, con-
crete and stone, as well as for drilling in wood, metal,
ceramic and plastic. Tools with electronic control and clock-
wise/anticlockwise rotation are also suitable for screwdriv-
ing.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck
(2) Spindle lock button (UniversalImpact 650, Univer-
salImpact 700, UniversalImpact 700 + Drill Assist-
ant)
(3)
"Drilling/impact drilling" selector switch
(4)
Rotational direction switch
(5)
Lock-on button for on/off switch
(6)
On/off switch
(7)
Speed preselection thumbwheel
(8)
Release button for Drill Assistant
A)
(9)
Auxiliary handle with depth stop
A)B)
(10)
Drill Assistant
A)
(11)
Dust container
A)
(12)
Dust container release button (2x)
A)
(13)
Dust collection device
A)
(14)
Sealing ring
A)
(15)
Dust protection ring
A)
(16)
Clamp for dust collection device
A)
(17)
Adjusting ring
A)
(18)
Wing bolt for auxiliary handle attachment for Drill As-
sistant
A)
(19)
Handle (insulated gripping surface)
(20)
Auxiliary handle (insulated gripping surface)
(21)
Wing bolt for auxiliary handle adjustment
B)
(22)
Button for depth stop setting
B)
(23)
Depth stop
B)
(24)
Universal bit holder
B)
(25)
Screwdriver bit
B)
(26)
Adapter
A)
(27)
Hex key
C)
(28)
Keyed chuck
(29)
Chuck key
A)
Included as standard with the UniversalImpact 700 + Drill
Assistant
B)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
C)
Commercially available (not included in the scope of deliv-
ery)
Technical Data
Impact drill UniversalImpact
650
UniversalImpact
700
UniversalImpact
700 +
Drill Assistant
UniversalImpact
730
Article number
3 603 A31 2.. 3 603 A31 0.. 3 603 A31 0.. 3 603 A31 0..
Rated power input W 701 701 701 701
Bosch Power Tools 1 609 92A 57D | (29.11.2019)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch UniversalImpact 7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalImpact 7000 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info