Manual Bosch UniversalHedgeCut 60 (page 12 of 191) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707742

Zoom out

Zoom in

1/191

12 | English

Hedgecutter

UniversalHedgeCut

AdvancedHedgeCut

Weight according to

EPTA‑Procedure

01:2014

kg 3.5 3.7 4.0 4.1

Protection class

/ II / II / II / II

Serial number see type plate on garden tool

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

3 600 HC0 500 3 600 HC0 700 3 600 HC0 800 3 600 HC0 900

Noise emission values determined according to EN60745-2-15.

Typically the A-weighted noise levels of the product are:

– Sound pressure level dB(A)

69 69 71 71

– Sound power level dB(A)

90 90 92 92

– Uncertainty K dB

1.0 1.0 1.0 1.0

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN60745-2-15

– Vibration emission value a

m/s

2.5 2.5 2.5 2.5

– Uncertainty K m/s

1.5 1.5 1.5 1.5

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Operation

u Pay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the machine.

Switching ON/OFF (see figures C and D)

To switch ON, firstly press and hold the lock-off button for

On/Off switch (3). Then press the On/Off switch (2) and

keep it pressed.

To switch OFF, release the lock-off button for On/Off switch

(3) and then release the On/Off switch (2).

Sawing Function

Although the tooth opening allows wood to be cut up to

Ø20mm, the tip of the blade is designed to cut wood up to

Ø25mm.

Working with the Hedgecutter (see figure E)

Move the hedgecutter evenly forward along the cutting line.

The double edge cutting blade enables cutting in either dir-

ection, or with a side to side motion.

Cut the sides of the hedge first, then the top.

To cut the sides straightly, we recommend cutting from bot-

tom to top in the direction of growth. Younger stems tend to

move outwards when cutting them from top to bottom, res-

ulting in shallow patches or holes in the hedge.

To reach a level finish, fasten a piece of string along the

length of the hedge at the required height and use as an

alignment guide. Cut the hedge just above the string.

Pay attention that no objects such as wires are cut. The

blade or drive can be damaged.

F 016 L81 787 | (16.08.2019) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalHedgeCut 60 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalHedgeCut 60 Manual

Product: