766887

Bosch UniversalHeat 600 Manual

11
Zoom out
Zoom in
Previous page
1/61
Next page
English | 11
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Storage surface
(2) On/off switch and power settings
(3) Nozzle
(4) Heat shield, removable (UniversalHeat 600)
(5) Surface nozzlea)
(6) Glass protection nozzlea)
(7) Angle nozzlea)
(8) Reflector nozzlea)
(9) Reducing nozzlea)
(10) Heat shrink plastic tubea)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Hot air gun EasyHeat 500 UniversalHeat 600
Article number 3 603 BA6 0.. 3 603 BA6 1..
Rated power input W 1600 1800
Airflow l/min 240/450 200A)/350A)/500A)
Temperature at the nozzle outletB) °C 300/500 50A)/300A)/600A)
Temperature measurement accuracy ±10% ±10%
Weight according to EPTA-Procedure 01:2014 kg 0.47 0.53
Protection class / /
A) The amount of air increases when the temperature rises from 50°C to 300 °C/600°C. The speed of the fan is identical at all power settings.
B) At an ambient temperature of approx. 20°C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the power
tool is less than 70dB(A).
Total vibration values ah (triax vector sum) and uncertainty
K: ah≤2.5m/s2, K=1.5m/s2.
Operation
Starting Operation
uPay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
rating plate of the power tool.
Creation of Smoke During Initial Use
A coating protects the metal surfaces from corrosion ex-
works. This protective layer evaporates during initial use.
Switching On
Slide the on/off switch (2) upwards.
Switching Off
Slide the on/off switch(2) downwards into the0position.
uUniversalHeat 600: After working at high temperat-
ures for a prolonged period, let the power tool cool
down by briefly running it at the 50 °C power setting
before switching it off.
Selecting a power setting
You can choose between different power settings using the
on/off switch(2):
EasyHeat 500 UniversalHeat 600
Setting °C l/min Setting °C l/min
– – 50 200
300 240 300 350
500 450 600 500
UniversalHeat 600:
uWhen changing from 50 °C to 300 °C/600°C, the
speed and therefore the operating sound of the gun
do not change.
The 50 °C power setting is suitable for cooling down a
heated workpiece or for drying paint. It is also suitable for
cooling down the power tool before putting it down or chan-
ging the attachment nozzles.
Practical advice
uPull the plug out of the socket before carrying out any
work on the power tool.
Note: Do not position the nozzle(3) too close to the work-
piece that you are using the power tool on. The resulting
build-up of air can cause the power tool to overheat.
Removing the heat shield (UniversalHeat600)
When working in particularly tight spaces, you can remove
the heat shield(4) by turning it.
uCaution: Nozzle is hot! Working without the heat shield
increases the risk of burns.
Always switch the power tool off and allow it to cool before
removing or attaching the heat shield(4).
Bosch Power Tools 1 609 92A 66S | (09.12.2020)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch UniversalHeat 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalHeat 600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info