Manual Bosch UniversalGrassCut 18 (page 29 of 492) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708203

Zoom out

Zoom in

1/492

English | 29

To switch off, release the On/Off switch (8).

Lawn Trimming/Edge Cutting (see figures I − K)

Lawn trimming (see figure I)

Press the foot pedal (4) and set the 48° angle for lawn trim-

ming.

Move the trimmer left and right, keeping it well away from

the body. Cut higher grass in steps.

Edge cutting (see figure J)

Press the foot pedal (4) and set the 36° angle for edge cut-

ting. Rotate the handle by 180° and then turn the trimmer

clockwise to the desired working position.

Guide the trimmer along the edge of the lawn. By using the

wheel, you avoid contact with solid surfaces or walls to pre-

vent rapid wear of the cutting line.

Cutting around trees and bushes (see figure K)

Press the foot pedal (4) and set the 24° angle for cutting

around trees and bushes.

Carefully cut around trees and bushes so that they do not

come into contact with the cutting line. Plants can die if you

damage the bark.

Dismounting the spool, winding up the cutting

line and mounting the spool (see figures N to L)

u Remove the battery before replacing the spool.

Press both latches of the spool cover together and remove

the spool cover (13). Afterwards, remove the empty spool

(14).

Cut off approx. 6 m line from the refill roll. Thread the end of

the line into the spool's hole for line wind-up (15). Thread/

work the line under the hook (17). Then, thread/work the

line up and through the slot (18) in the spool. Afterwards,

wind up the thread on the spool uniformly and tightly.

Slide the other end of the cutting line through the hole for

line guiding (19) in the trimmer head and mount the spool

back into the trimmer head. Affix the spool by mounting the

spool cover (13).

The spool cover (13) can only be mounted in one position.

Line Feeding

IntelliFEED

The trimmer is equipped with the IntelliFEED system, which

automatically rolls off the line to retain the cutting diameter.

Troubleshooting

d.c.

Lawn Edge Trimmer/Grass Trimmer

Problem Possible Cause Corrective Action

Motor refuses to start Battery discharged Recharge battery.

Battery too hot/cold Allow to cool/warm.

Garden tool functions

intermittently

On/Off switch defective Contact Bosch customer service agent.

Internal wiring of garden tool defective Contact Bosch customer service agent.

Garden product la-

bours

Grass too high Cut in stages.

Garden tool does not

cut

Cutting line too short/broken off Manually feed cutting line.

Spool empty Replace line spool.

Cutting line can no

longer be fed

Line inside the spool entangled Inspect the spool, rewind if necessary.

Spool empty Refill line spool.

Incorrect winding Rewind the spool.

Excessive line Shorten line to correct length.

Cutting line entangled Problems with the line feed system Contact Bosch customer service agent

Cutting line retracts

into spool

Cutting line too short/broken off

Remove spool – rethread line (see figures L − N).

Line breaks frequently Line inside the spool entangled

Remove spool – rewind line (see figures L − N).

Trimmer used incorrectly Only trim with the tip of the line, avoid stones,

walls and other hard objects. Feed the line regu-

larly to maintain full cutting diameter.

Trimmer vibrates ab-

normally

Clamping ring or spool cover not mounted to

spool

Mount clamping ring or spool cover onto spool.

Bosch Power Tools F 016 L81 803 | (22.02.2019)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalGrassCut 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalGrassCut 18 Manual

Product: