Manual Bosch UniversalGardenTidy (page 18 of 296) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707864

Zoom out

Zoom in

1/296

18 | English

u Before any work on the product, disconnect supply

cord from the mains.

Connect the three parts of the vacuum tube (7). Take care

not to pinch your fingers during assembly.

Mount the vacuum tube (7) onto the motor unit. Insert the

vacuum tube (7) into the hinge on the motor unit. Raise the

vacuum tube (7) to align the fastening screw with main hous-

ing, and screw in the fastening screw (3) until fully tight and

clicks are heard to secure the vacuum tube.

Mount the collection bag (10) to the motor unit and attach

the bag clips to the hooks on the vacuum tube. Take care not

to pinch your fingers during assembly.

Mounting the shoulder strap (seefigure H)

Fasten the shoulder strap (9) with both hooks (8) to the

shoulder -strap loops (13), Adjust the shoulder strap (9) so

that it comfortably carries the weight of the product and can

be guided easily.

Mounting and Adjusting the handle (see figures I

and J)

To attach the handle, place the handle (5) over the holders

on the tube, then insert the screw (6) though the handle and

tighten.

To adjust the angle then loosen the screw (6), move the

handle (5) up or down to the desired working position and

then tighten the screw (6) again.

Operating (see figures K, L and M)

Make sure that the cable is not in your way while working.

Fasten the cable in the cable holder on the side of the auxili-

ary handle. (seefigureK)

To switch on, turn the On/Off switch (1) clockwise until it

clicks.

The airflow speed is variable. To increase the airflow speed,

turn the On/Off switch (1) clockwise.

To reduce the speed, turn the On/Off switch (1) anticlock-

wise.

To switch off, turn the On/Off switch (1) anticlockwise until

it clicks.

Set the On/Off switch (1) of the product to "0" before dis-

connecting the mains voltage or pulling the mains plug.

Direct the vacuum tube towards the debris that you want to

collect. If no debris is collected/moved, increase the airflow

speed.

Disassembling (see figures N and O)

u Before carrying out any work on the product, discon-

nect supply cord from the mains.

To empty the collection bag (10), press button (11) and re-

move the collection bag (10). Remove the clips from the va-

cuum tube (7). Open the zip and empty the collection bag

(10) as required.

To disassemble, press button (11) and remove the collec-

tion bag (10). Remove the clips from the vacuum tube (7).

Take care not to pinch your fingers during disassembly.

Loosen the fastening screw (3). Remove the vacuum tube

(7) and store it securely.

Working Advice

When operating, always point the nozzle/vacuum tube to-

wards the ground.

Do not blow hot, flammable or explosive material.

The product is only suitable for foliage and garden waste.

Please inspect the area for little animals and hard objects be-

fore using the product.

Do not vacuum liquids, plastic bags, cans, pine cones,

branches larger than 5mm (Ø>5mm), cloth, tissues and

pegs.

The motor will only start, if the following parts are assembled

correctly:

– vacuum tube and collection bag in vacuum mode

– nozzle and safety cover in blow mode

Troubleshooting

Problem Possible Cause Corrective Action

Product does not run Components not assembled correctly see “assembly”.

Power turned off Turn power on.

Mains socket faulty Use another socket.

Extension cable damaged Inspect cable, replace if damaged.

Fuse faulty / blown Replace fuse.

Motor protector has activated Allow motor to cool down and check that fan is

not blocked.

Product runs intermit-

tently

Extension cable damaged Inspect cable, replace if damaged.

F 016 L81 834 | (21.03.2019) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalGardenTidy in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch UniversalGardenTidy Manual

Product: