795171

Bosch UniversalDistance 50 Manual

27
Zoom out
Zoom in
Previous page
1/399
Next page
English | 27
List of the last measured values/calculations
The measuring tool stores the last ten measured values and their calculations and dis-
plays them in reverse order (most recent measured value/most recent calculation dis-
played first).
Press the (6) button to display the list of measured values.
Deleting measured values in the measured value list
Briefly press the on/off button (8) to delete the currently displayed measured value.
Press the (6) button and the on/off button (8) simultaneously to delete all measured val-
ues from the list.
Practical Advice
General advice
The reception lens (12) and the laser beam output (13) must not be covered during the
measuring process.
The measuring tool must not be moved while a measurement is being taken (unless in
continuous measurement mode). It is therefore advisable to place the measuring tool at
or on the measuring points.
The measurements are taken at the centre of the laser beam, even when the laser is poin-
ted at surfaces diagonally.
Influences on the measuring range
The measuring range depends on the lighting conditions and the reflective properties of
the target surface. For better visibility of the laser beam when working outdoors and in
bright sunlight, use the laser viewing glasses (15) (accessory) and the laser target plate
(16) (accessory) or shade the target area.
Influences on the measurement result
Due to physical effects, the possibility of inaccurate measurements when measuring vari-
ous surfaces cannot be excluded. These include:
– Transparent surfaces (e.g. glass, water)
– Reflective surfaces (e.g. polished metal, glass)
– Porous surfaces (e.g. insulating materials)
– Structured surfaces (e.g. roughcast, natural stone).
If necessary, use the laser target plate (16) (accessory) on these surfaces.
Layers of air at different temperatures and indirectly received reflections can also influ-
ence the measured value.
Bosch Power Tools 1 609 92A 7LP | (02.05.2022)
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch UniversalDistance 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch UniversalDistance 50 in the language / languages: All languages as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info