697439
14
Zoom out
Zoom in
Previous page
1/40
Next page
14 | Mounting
Uni 3000 F6 720 812 900 (2014/10)
3.3 Lifting the boiler with a crane
You can lift and transport the boiler with a crane ( Fig. 10, [1]).
Insert the hooks on the transport chain [3] into the holes of the four
gusset plates [4] on the boiler body.
Attach the lifting hook of the crane [2] to the lifting rope.
Fig. 10 Lifting the boiler with a crane
[1] Boiler
[2] Crane hooks with safety mechanisms
[3] Hook of lifting rope
[4] Gusset plates (Installation location depends on the boiler size)
4 Mounting
4.1 Installing the boiler
Installation room requirements:
The support surface must provide sufficient load-bearing capacity
and solidity.
The installation room must be dry and free from the risk of frost.
The size of the installation room must be adequate to ensure correct
operation.
Minimum wall clearances
Observe the specified minimum wall clearances for the foundations or
installation surface ( Fig. 11, and Tab. 13). The surface on which the
boiler is to be positioned must be of load-bearing capacity, even and
level. The front edge of the boiler should be flush with the edge of the
foundation.
Fig. 11 shows an installation example.
The burner door closure can be fitted to the left or right ( Chapter 4.5
from page 18).
Boiler dimension data can be found in Chapter 2.16, page 8.
DANGER: Risk to life through falling load.
Only use lifting ropes of the same length.
Only use lifting ropes that are in perfect condition.
Hook lifting tackle only into the lifting eyes provided
in the gusset plates on top of the boiler.
Never hook lifting tackle into the locking lugs on
the side of the boiler, or into the connectors.
Lift the boiler with a crane only if you are suitably
qualified to operate the crane.
Never lift the boiler with a crane on its side or on end.
Never use the locking lugs for lifting.
3
1
4
4
6 720 806 032-23.1ITL
< 90°
_
2
Regarding installation and operation of your heating
system, observe all relevant national standards and
guidelines.
The information on the data plate is binding and must be
observed.
DANGER: Risk to life through poisoning!
Insufficient ventilation can lead to dangerous flue gas
leaks!
Never close off or reduce the size of ventilation and
extract air vents.
Never operate the boiler unless faults are rectified
immediately.
Inform the operator in writing of any faults and their
associated risks.
DANGER: Risk of fire through flammable materials or
liquids.
Never store flammable materials or liquids in the
immediate vicinity of the heat source.
NOTICE: Risk of system damage through frost.
Position the boiler in a room free from the risk of frost.
Boiler Boiler size
Clearance
A
H
in mm
Clearance
A
V
in mm
1)
1) Observe dimension L
BR
(burner length) and dimension B
T
(swivelling range of
the burner door, Tab. 7, page 8 and Tab. 10, page 11) in relation to clearances
A
V
and A
S
(on the closure side of the burner door).
Clearance
A
S
in mm
1)
Uni 3000 F 420 -1850 1000 2500 250+L
BR
2)
2) On the Uni 3000 F, observe the dimension of the particular control unit with
regard to the minimum clearance A
S
(on the installation side of the control unit
250+L
BR
). On the side where the burner door is not hinged, only observe
250mm clearance. If the hinge arrangement may change following installation
please observe the L
BR
dimension.
Table 13 Specified wall clearances
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Uni 3000 F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Uni 3000 F in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Uni 3000 F

Bosch Uni 3000 F User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info