697108

Bosch Tronic 8500 - 24-27 Manual

13
Zoom out
Zoom in
Previous page
1/44
Next page
A fault, what to do?
13
6 720 876 029 (2018/09)
12 A fault, what to do?
WARNING:
Attention!
Repairs must only be carried out by an authorised technician. Improper
repairs can lead to risk of serious injury to the user.
If your appliance does not operate as required, it is often due to a very
minor problem. Please check whether you can remedy the fault yourself
by using the following guidelines. You will save yourself the costs of an
unnecessary visit by customer service personnel.
12.1 Faults that the customer can troubleshoot himself
If the fault could not be eliminated, please call customer service.
12.2 Faults that the customer service specialist should troubleshoot
12.3 Faults that are automatically remedied
Fault Cause Solution
Water flow-rate is too low. The filter in either the water tap or the showerhead
is clogged.
Remove the filter and either clean it or descale it.
A high water temperature is set,
but it is not reached.
The continuous-flow heater is connected to
a thermostatically-controlled water tap.
Set the temperature on the continuous-flow heater
to “60 °C”.
The display is blank. The fuse in the fusebox has tripped/blown. Check the fuse in the fusebox.
The water is not warm. The supply temperature has reduced. Reduce the water flow on the taps until the desired
water temperature is reached.
The temperature of the water leaving
the tap is higher than the set
temperature.
The temperature of the water supplying
the continuous-flow heater is higher than the set
temperature (e. g. due to pre-warmed water supplied
from a solar water heater).
The thermostatic premixer in the domestic supply
must be set accordingly to lower temperatures.
Lights up in the display. The power limit has been reached. Reduce the water flow at the tap or lower
the temperature setting on the appliance.
Fault Cause Solution
Water flow-rate is too low despite
cleaning of filter using the water tap
or showerhead.
A filter in the appliance is clogged. Get a servicing expert to clean the appliance.
The display is blank despite fault-free
function of the mains electricity supply
fuses.
There is a fault in the appliance. Get a servicing expert to check the appliance.
The display shows the error code “E..”. There is a fault in the appliance. Get a servicing expert to check the appliance.
Fault Cause Solution
The display shows “00,0°C”. The air sensor in the appliance detects air in the water
and momentarily switches the heating element off.
After a few seconds, the continuous-flow heater
automatically goes back into operation.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Tronic 8500 - 24-27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 8500 - 24-27 in the language / languages: English, German, Dutch, French, Polish, Turkish as an attachment in your email.

The manual is 13,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info