697112
7
Zoom out
Zoom in
Previous page
1/40
Next page
Operating instructions
7
6 720 876 024 (2018/09)
Safety of electrical devices for domestic use and
similar purposes
The following requirements apply in accordance with
EN 60335-2-35 in order to prevent hazards from
occurring when using electrical appliances:
“This appliance can be used by children of 3 years and
older, as well as by people with reduced physical,
sensory or mental capabilities or lacking in experience
and knowledge, if they are supervised and have been
given instruction in the safe use of the appliance and
understand the resulting dangers. Children shall not
play with the appliance. Cleaning and user
maintenance must not be performed by children
without supervision.”
“If the power cable is damaged, it must be replaced by
the manufacturer, its customer service department or
a similarly qualified person, so that risks are avoided.”
Congratulations on purchasing this BOSCH appliance.
You have acquired a top-quality product, which will
give you a lot of enjoyment.
2 Operating instructions
2.1 Getting to know your appliance
This appliance is an electronically-regulated, pressurized continuous-
flow heater for decentrally supplying hot water.
The electronic continuous-flow heater heats the water as it flows through
the appliance. One or more taps can be supplied with warm water.
2.1.1 Operating elements and displays
1 Display
2 Rotary selector switch
2.2 Operating the appliance
2.2.1 Switching the appliance on and off
The continuous-flow heater switches on and heats the water when the
warm water tap is opened. It switches off again if the water tap is closed.
2.2.2 Setting the water temperature
Turn the rotary selector switch.
Any desired temperature can be set between 30 °C to 60 °C in
increments of 0.5 °C.
The display shows the selected temperature.
Note: The displayed temperature is the water temperature inside the
appliance. The temperature of the water leaving the tap can vary from
this due to heat losses in the pipework.
2.2.3 Error message in the display
If an error message “E..” appears in the display or an LED flashes, see
chapter “A fault, what to do?”.
2.2.4 Solar heated
The appliance can be operated with pre-warmed water (for example,
from a solar energy unit).
CAUTION:
Attention!
Scalding danger!
If the output temperature of the water leaving the tap is higher than
the set temperature, then this is because the supply water
temperature from the domestic system is too hot, e. g. due to its
being heated by a solar energy unit.
The thermostatic premixer in the domestic supply must be set
accordingly to lower temperatures.
2.2.5 Startup after power failure
Open the warm water tap fully and allow water to flow until it is warm.
2.2.6 Using the appliance after switching off the water supply
Switch off the appliance (unscrew the fuse in the fusebox).
Open the warm water tap and keep it open until the air has been
completely forced out of the water pipe.
Switch the fuse back on again.
Open the warm water tap fully and allow water to flow for at least one
minute.
Only then (for safety reasons) will the appliance begin to heat.
The appliance is now ready to operate.
2.2.7 Saving energy
Set the desired water temperature directly on the appliance.
Note: Mixing in of cold water at the faucet/fitting consumes unnecessary
water and energy.
This also accelerates calcification (scaling) of the appliance. Therefore,
please always set the desired temperature directly on the continuous-
flow heater.
2.2.8 Winter operation
Note: It is possible in winter that the supply temperature of the water is
reduced and the required outlet temperature is no longer achieved.
Reduce the water flow on the taps until the desired water
temperature is reached.
2.3 Cleaning
Only wipe off the appliance using a moist cloth.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Tronic 7000 - 21-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 7000 - 21-24 in the language / languages: English, German, Dutch, French, Polish, Turkish as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info