Manual Bosch Tronic 5000 - 11-13 (page 6 of 44) (English, German, Dutch, French, Polish, Turkish)

697116

Zoom out

Zoom in

1/44

Operating instructions

6 720 876 034 (2018/09)

Congratulations on purchasing this BOSCH appliance.

You have acquired a top-quality product, which will

give you a lot of enjoyment.

2 Operating instructions

2.1 Getting to know your appliance

This appliance is an electronically-regulated, pressurized continuous-

flow heater for decentrally supplying hot water.

The electronic continuous-flow heater heats the water as it flows through

the appliance. One or more taps can be supplied with warm water.

2.2 Operating elements

1 Rotary selector switch

2 Status display

3 Operating the appliance

3.1 Switching the appliance on and off

The continuous-flow heater switches on and heats the water when the

warm water tap is opened. It switches off again if the water tap is closed.

3.2 Setting the water temperature

• Turn the rotary selector switch.

Use the continuously-variable switch to set the desired temperature for.

Note: If a thermostatic-regulating mixer tap is used for high

temperatures or for large water volumes, then it is recommended

that the setting “Bathing” or “Rinsing” be selected.

Increasing the water temperature

If a higher temperature is not obtained when the warm water tap is fully

opened, then this is because more water is flowing than the continuous-

flow heater’s power capacity can heat.

• If this happens, then slightly close the warm water tap.

Decreasing the water temperature

• Turn the rotary selector switch to a lower level e. g. “Washing hands” .

Note: If the temperature of the water supplying the appliance changes,

then the output temperature of the water leaving the tap also changes

correspondingly.

3.3 Status display

3.4 Startup after power failure

• Open the warm water tap fully and allow water to flow until it is warm.

3.5 Using the appliance after switching

off the water supply

• Switch off the appliance (unscrew the fuse in the fusebox).

• Open the warm water tap and keep it open until the air has

been completely forced out of the water pipe.

• Switch the fuse back on again.

• Open the warm water tap fully and allow water to flow for at least

one minute.

Only then (for safety reasons) will the appliance begin to heat.

The appliance is now ready to operate.

3.6 Saving energy

• Set the desired water temperature directly on the appliance.

The appliance is operated economically when set to approximately

40 °C (rotary selector switch: “Showering” ).

Note: Mixing in of cold water at the faucet/fitting consumes unnecessary

water and energy.

This also accelerates calcification (scaling) of the appliance. Therefore,

please always set the desired temperature directly on the continuous-

flow heater.

3.7 Winter operation

Note: It is possible in winter that the supply temperature of the water

is reduced and the required outlet temperature is no longer achieved.

• Reduce the water flow on the taps until the desired water

temperature is reached.

4 Cleaning

• Only wipe off the appliance using a moist cloth.

• Do not use acidic or abrasive cleaning materials.

• Do not use a steam cleaner.

Washing hands Showering

Bathing Rinsing

LED Appliance status

Off Off

Lights green On

Flashes green (1/s) The set temperature is not obtained; the rate

of water flow is too high for appliance rating

(the appliance has reached the power limit).

See “ A fault, what to do?”

Flashes green (2/s) Cold-water rinse-through phase

Flashes red See “ A fault, what to do?”

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 5000 - 11-13 in the language / languages: English, German, Dutch, French, Polish, Turkish as an attachment in your email.

The manual is 4,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Tronic 5000 - 11-13 Manual

Product: