780660
15
Zoom out
Zoom in
Previous page
1/24
Next page
Operating instructions
15
Tronic 1500 TO – 6720891050 (2021/07)
NOTICE:
The appliance may never be exposed to frost!
WARNING:
Risk of electric shock!
If a fault occurs, immediately disconnect the plug from the
power supply!Immediately shut off the cold water supply to
the appliance in case of leak.
Please read and observe the detailed safety instructions at
the start of these instructions!
5.1 Operating the appliance
The small water heater heats and stores drinking water up to
approx. 85 °C.
The warm water outlet of the small water heater serves
for pressure equalisation and may be connected only to
special tap mixers (BZ 13051 or BZ 13062 for
undersink models and BZ11113 for oversink models).
5.1.1 Setting the water temperature
The outlet temperature can be regulated to approx. 40 °C
(Position “1”), approx. 55 °C (Position eco) and
approx. 85 °C (Position “3”).
The rotary selector switch also switches on the heating system.
Position:
●Cold
*Frost protection
1Approx. 40 °C
eco Energy saving pos. approx. 55 °C
3Hot water approx. 85 °C
During heating, the pilot lamp lights and expansion water drips
from the outlet.
The appliance will be covered more quickly with limescale at
higher temperatures.
Tip: Set the rotary selector switch to eco to operate the
appliance economically and to reduce the effects of limescale.
Limitation of the water temperature
Fig. 9
Limit the outlet temperature to avoid scalding with hot water:
Set the rotary selector switch to “●”.
Open the cover of the rotary selector switch.
Select between left = approx. 40 °C or right =
approx. 60 °C.
Close the cover.
5.1.2 Switching off
Set the rotary selector switch to “●”. The heating is
switched off.
5.2 Cleaning
Do not use aggressive or abrasive cleaning detergents.
Do not use a steam cleaner.
Clean appliance externally with a mild cleaning agent.
5.3 Descaling
Descale the outlet pipe with commercially available
descaling agent or vinegar.
Please observe the manufacturers warnings when
descaling.
If the water flow is significantly slower when the tap is fully
opened, the small water heater and tap should be descaled by
a specialist. Otherwise, a pressure that is higher than allowed
can be produced.
5.4 Fault
If the water is no longer being heated:
Set the rotary selector switch to “●” and disconnect the
mains plug.
Open the hot water tap and allow approx. 4 litres of water to
run through.
Then reconnect the mains plug and select desired
temperature.
Maintenance and repair work should only be performed by
a qualified professional.
WARNING:
Risk of electric shock!
Disconnect the power supply before opening the
appliance!
5.5 Customer service
We ask you to always provide the E-No. and the FD-No. of your
appliance when calling in a customer service engineer. You will
find the number near both water connection nozzles of the
small water heater (Fig. 10).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Tronic 1500 TO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Tronic 1500 TO in the language / languages: English, German as an attachment in your email.

The manual is 2.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info