458020
22
Zoom out
Zoom in
Previous page
1/136
Next page
22
TR 200
English
If you enter the number of days absent shortly
before leaving, the number entered must be
“14” (Saturday, Sunday, ... Thursday and Fri-
day, since on the Saturday you return you
want the regulator to switch the heating sys-
tem on as usual.
After closing the lid, the display (e) shows:
14 days absent
17:53 16.5°C
The regulator immediately regulates to the
temperature set with the control knob (m)
The remaining days until you return are al-
ways displayed. After the set number of days
(at midnight) the regulator automatically termi-
nates economic operation and returns to auto-
matic operation.
If you would like to carry out further alterations
do not yet close the lid.
Please note that the temperature set
with the control knob (m) should be harm-
less to your pets, plants, etc. for the entire
course of your absence.
If you intend to return to your house in the
morning, it might be better to start heating
shortly after midnight instead of waiting for
first heating operation in the morning. In this
case, depress the button (q). after having
set the number of days absent. The display
shows:
“Automatic +/-”
. Now you can set the op-
erating mode required on return with the but-
ton “+” (p) or “–” (o), either to continuous
heating operation or to automatic operating
mode. If you have selected continuous heat-
ing operation, the temperature is regulated to
the value set with the control knob (k), be-
ginning at midnight before your return. Do not
forget to depress the button (g) after your
return in order to terminate continuous heating
operation.
In case that the holiday operating mode
should be terminated early, it is possible to
either briefly depress the button (g) twice,
or to set the number of days absent to “0” as
described above.
Continuous heating operation for several days
can also be programmed by setting the
number of days as described above and turn-
ing up the economic temperature to the re-
quired value with the control knob (m).
6.2.6Control knob set to i
Having the set values displayed
Turn the control knob (n) to the position i. The
upper display line (e) shows the present day.
If the button (q) is depressed, the follow-
ing group is displayed. Each value in the
group (if entered) is displayed for 5 seconds
before the regulator moves to the next value.
If you wish to have the next value displayed
faster, depress the button (p).
If you wish to have the value displayed for a
longer time, briefly depress the button “–” (o)
and the display keeps showing this parame-
ter.
By depressing the button (q) the display
moves to the next parameter after 5 seconds.
In the first group, the following general val-
ues are dis-played (e) in a five-second-time,
non-existing values are not considered:
Tip
Display example
(5-second-time
sequence)
Parameter description
Temperatures
Title of the first group
Room temp. here
21.5 °C
Measured room tempera-
ture at the regulator “here”
is only displayed if an exter-
nal sensor (accessory) is
connected.
Room temp. remote
21.0 °C
Measured room tempera-
ture at the
external sensor (acces-
sory).
Room temp. set
21.5 °C
The set temperature with
which the regulator is oper-
ating.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TR 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TR 200 in the language / languages: Dutch as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch TR 200

Bosch TR 200 Quick start guide - German - 1 pages

Bosch TR 200 Usermanual and installation guide - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info