Settings en
17
Switching the audible signal
on/off
Whenever a button is pressed, an
audible signal sounds.
This can be switched on or off.
1. Press and hold % and
Calc’nClean for at least 3 seconds.
2. Touch the “V” button Cappuccino
repeatedly until "Sound" appears.
3. Confirm by pressing the “ok” button
Latte Macchiato.
The factory settings are activated,
the language selection appears.
4. Touch the “V” button Cappuccino
and select "Sound on" or "Sound
off".
5. Confirm by pressing the “ok” button
Latte Macchiato.
The factory settings are activated,
the language selection appears.
6. Touch the “¾” button Caffe Crema to
exit the menu.
Setting the language
1. Press and hold % and
Calc’nClean for at least 3 seconds.
2. Touch the “V” button Cappuccino
repeatedly until "Language" appears.
3. Confirm by pressing the “ok” button
Latte Macchiato.
The factory settings are activated,
the language selection appears.
4. Touch the “V” button Cappuccino
and select the required language.
5. Confirm by pressing the “ok” button
Latte Macchiato.
The factory settings are activated,
the language selection appears.
6. Touch the “¾” button Caffe Crema to
exit the menu.
Setting the water hardness
It is important to set the water hardness
correctly so that the appliance indicates
in good time when the descaling
programme should be run. The preset
water hardness is level 4.
You can check the water hardness
using the enclosed test strip or by
asking your local water supplier.
1. Briefly immerse the enclosed test
strip in fresh tap water, leave it to
drip and read off the result after 1
minute.
The number of fields on the test strip
that change colour indicate the water
hardness level.
2. Press and hold % and
Calc’nClean for at least 3 seconds.
3. Touch the “V” button Cappuccino
repeatedly until "W. hardness"
appears.
4. Touch the “ok” button Latte
Macchiato and confirm.
5. Touch the “V” button Cappuccino
and select the water hardness. The
following settings are possible:
– W. hardness 1
– W. hardness 2
– W. hardness 3
– W. hardness 4 (factory setting)
– Water filter (when used)
– H2O-Softener (setting if water
softener available)
6. Touch the “ok” button Latte
Macchiato to save the setting.
7. Touch the “¾” button Caffe Crema to
exit the menu.
