112553
11
Zoom out
Zoom in
Previous page
1/56
Next page
11
Use
The position of the programme selector
switch should not be changed during the
ironing process.
Changing the position of the programme
selector switch during the ironing process
does not alter the original programme
setting.
In order to fix the result of the ironing process,
the ironing dummy blows cold air for the last
minute of the ironing cycle.
When the ironing process comes to an end, a
sound signal is emitted and the light indicating
the “start / stop” function goes out.
Pausing the ironing process
The ironing process can be paused to stop the
ironing process, e.g. to correct the width of the
ironing dummy. To do this:
Press “start/stop“ while the ironing cycle is
under way.
The ironing process stops and the airing
motor turns itself off. The “start/stop”
indicator light flashes for 30 seconds. The
ironing programme can be started again at
any time during this period.
Adjust as desired.If you press Start/Stop
again during this period, the appliance
continues the cycle from where it left off.
If the 30-second time limit is exceeded, the
“start/stop” function light goes out: the
programme has finalised. It is necessary to
start a new ironing cycle.
If you change the position of the
programme selector switch while on
pause, the pause option is disabled and it
is necessary to reprogramme the
appliance. The previously-selected
programme is interrupted.
End of the ironing process
When the minute of cooling comes to an end,
a sound signal is emitted and the programme
finalises.
The ironing dummy slowly deflates.
Set the collar adjuster knob to vertical.
Open all the flaps on the button band
adjuster and on the collar support.
Open all of the flaps on the button band
adjuster and the collar support.
Release the cuff adjusters and pull them out
of the stretched shirtsleeves.
Leave the shirt to cool on a hanger to help
fix the results of the ironing process.
The next shirt can now be fitted onto the
appliance ready for the ironing process to
begin again.
Ironing/Airing
Warning!
Foreign objects (e.g. pens, clips) may
damage the garment and/or the ironing
dummy.
Do not air knitwear or elasticated
garments! They may loose shape.
Only air non-elasticated, cloth garments.
There are two ironing/airing programmes to
choose from: cold and hot, see Airing in
“Preparing your garments”.
Empty all the pockets on the garment to be
aired.
Fit the garment onto the appliance and
secure it as described in the “ironing”
section. See “Use”.
If the garment is a jacket, then it is not
necessary to secure the cuffs. Remove the
cuff adjusters if necessary.
Selected the desired airing programme with
the programme selector switch. See “Use”.
Press “start/stop“. The start/stop light lights
up. The ironing dummy inflates and the
airing process begins.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch THB 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch THB 1500 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info