532230
17
Zoom out
Zoom in
Previous page
1/168
Next page
13
TES80.. | 04/2013
en
Contrast
The display 5 contrast can be set from –10
to
+10. The factory setting is +0.
Turn the rotary knob 6 to select the
required setting.
Water hardness
Turn the rotary knob 6 to select the
required water hardness
1, 2, 3 or 4.
Info: It is important to set the water hard-
ness correctly, so that the appliance indi-
cates accurately when the descaling pro-
gramme should be run. The factory setting
for the water hardness is
4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip brie y in water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Water filter
A new water  lter 29 must be rinsed before
it can be used.
To do this, press the water  lter 29 rmly
into the water tank 11 with the aid of the
measuring spoon 14. Fill the water tank
with water up to the “max” mark.
Turn the rotary knob 6 to select start
and press the start button 8.
Place 1 l container
Place suction pipe in container
start
Place a container with a capacity of 1 litre
under the milk frother 10.
Place the end of the suction pipe 10d in
the container.
Press the start button 8. Water will now
ow through the  lter 29 to rinse it.
Next, empty the container.
The appliance is ready for use again.
Info: Rinsing the  lter 29 simultaneously
activates the setting for the “change  lter”
display.
You can  nd detailed information about the
water  lter in the enclosed  lter instructions.
The  lter 29 is no longer effective when the
Service - change filter display appears, or
at the latest after two months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance).
Replacement  lters can be obtained from
retailers (TCZ7003) or from customer
service (575491).
TES803_805_807_1RW.indb 13 08.05.2013 14:52:59
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TES80551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TES80551 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch TES80551

Bosch TES80551 User Manual - German, Italian - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info