537417
18
Zoom out
Zoom in
Previous page
1/128
Next page
14
Robert Bosch Hausgeräte GmbH
14 en
Descaling
Duration: approx. 25 minutes.
Important: If there is a lter in the water
tank (16), it needs to be removed before the
descaling programme is run.
If the message Descale required!
appears on the display, press the e off / j
button (12) for 3 seconds and then press
the start button (10). The descaling pro-
gramme will start.
To descale the appliance before being
prompted, press the e off / j button (12) for
at least 3 seconds. Then press the e off / j
button (12) briey twice. Turn the upper
rotary knob (14) until Start descaling
appears in the display.
To start the descaling procedure, press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
Empty drip tray (8) and replace them.
N.B.: If the water lter is activated, the
display will prompt you to remove the
lter and then press the start button (10)
again. Remove the lter now if you have
not already done so. Press the start button
(10).
Fill descaler
Press start
Pour lukewarm water into the empty
water tank (16) up to the 0,5l mark and
dissolve 2 Bosch descaling tablets in it.
Press the start button (10).
Descale in progress
The descaling pro gramme will now run for
about 10 minutes.
Place container
Pull milk frother
Place a receptacle with a capacity of at
least 0.5 litres under the outlet.
Pull the milk frother (6) to open it.
Descale in progress
The descaling pro gramme will now run for
about 12 minutes.
Clean / Fill water tank
Press start
Rinse the water tank (16) and rell it with
fresh water up to the max mark.
Press the start button (10).
Descale in progress
The descaling pro gramme now runs for
about 30 seconds and rinses the appliance.
Push milk frother
Push the milk frother (6) in to close it.
Descale in progress
The descaling pro gramme now runs for
about 1 minute.
Empty drip tray
Insert drip tray
Empty drip tray (8) and replace them.
Replace the lter if one is being used. The
appliance has completed descaling and is
ready for use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust lm
on stainless steel and must therefore be
washed out thoroughly before use.
TES502_1RW.indb 14 21.02.2013 13:38:24
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TES50221RW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TES50221RW in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch TES50221RW

Bosch TES50221RW User Manual - Danish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info