537417
11
Zoom out
Zoom in
Previous page
1/128
Next page
7
TES502 | 02/2013
7en
Note: You can use the  lter indicator to
mark the month in which you inserted the
lter. You can also mark the month in which
you will need to replace the  lter next (at
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
Menu settings
You can adapt the appliance to your indi-
vidual needs in the menu settings.
1. Hold the e off / j button (12) down for
at least 3 seconds.
2. Press the
e off / j button (12) repeat-
edly until the required menu item
appears in the display.
3. Select the required setting with the
upper rotary knob (14).
4. Con rm by pressing the start button
(10).
To leave the menu without making any
changes, turn the rotary selector to
Exit
and press the start button (10).
You can set the following:
Shut off
Here you can set the time span after which
the appliance automatically switches off
following the last drink preparation. A time
between 15 minutes and 4 hours can be
set. The default time is 1 hour, but this can
be shortened to save energy.
Filter
Here you can set whether a water  lter is
being used. If a water  lter is not being
used, turn the setting to
No / Old. If a
water  lter is being used, turn the setting to
Activate fi lter. New water  lters have to
be rinsed before use (see “Water  lter” on
page 6).
Start CalcnClean
The service programmes (Calcn‘Clean /
descaling / cleaning) can be selected
manually here. Press the start button (10)
and run the selected programme (see
“Service Programmes” on page 13).
Temp.
The brewing temperature (high / middle /
low) can be set here.
Language
The display language can be set here.
Water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip brie y in water, gently
shake off any drips, and check the result
after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
TES502_1RW.indb 7 21.02.2013 13:38:17
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TES50221RW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TES50221RW in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch TES50221RW

Bosch TES50221RW User Manual - Danish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info